Products

This unique pedestal light has a nice, low profile - great for mounting on the ends of a bumper or perhaps on a tool box. Each light functions as b...

The reflectorized face of this light makes it very popular with our customers. Who doesn't love extra sparkle?This dual function (marker and turn s...

This round 4" diameter turn signal, also known as a pedestal light or lollipop light, is perfect for your mirrors, tool boxes, steps, or bumper.Thi...

This turn signal is lightweight enough to hang out on your bumper without breaking off, without sacrificing brightness. Each face has a 3" diameter...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This lollipop-style LED pedestal light can be fitted anywhere - bumpers, mirrors, wings, and more. Use it alone, or with help from one of our mount...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. One face of this light is amber, and one face of this ligh...

There is no specific driver or passenger's side for this light - it has turn signal diodes on each side, and therefore can be used as either a driv...

This turn signal is perfect for the end of a boxed-end bumper, or something a little more custom - on your street rod, perhaps? One side is Amber w...

This 19-diode pedestal or lollipop light is a perfect fit for fenders, bumpers, and windfins. One face is amber and the other face is red. Both sid...

Sold SINGLE. Hard-wired with three plain wires. These lights function at 12 volts.

Sold SINGLE. Dual function - works as both a marker and a turn signal. Hard-wired with three plain wires. These lights function at 12 volts.Each fa...

This DOT-approved LED turn signal is an awesome addition to mudflap hangers or a rear center panel.Electrical Hard-wired with one three-prong fema...

This tiny blue "button" style light is a single function, only. Requires a 3/4" diameter hole for mounting. Includes rubber grommet and chrome beze...

Sold SINGLE. This is a single function light, hardwired with two wires. The included 1157 LED bulb can be replaced.

Fits 1" x 2.5" rectangular marker lights. Lights ground to the base, and the base has one hot wire to be hooked into your harness or spliced in.

This chrome plastic bezel also has a visor. Features a 14 diode LED turn signal. This sequential style differs from our SKU #12725 (shown as a rela...

Compatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...

Sold individually. Includes amber (clear lens) 14 diode LED lower turn signal light and mounting screws for light. Existing headlight bezel bolts w...

Our best-selling headlight bezel now features a white, single function LED light. See related items for extra lights or other colors. Note: forward...

Sold individually. Side turn signals sold separately. Includes amber (clear lens) 14 diode LED lower dual function marker/turn signal light and mou...

This chrome plastic bezel fits over any 2 inch by 6 inch trailer style rectangular LED light. This is the first time we've had a bezel with a visor...

This mounting base fits all incandescent or LED 1" x 2.5" rectangular marker lights. No wiring or mounting hardware included.

This mounting rim is compatible with any incandescent or LED 1" x 4" rectangular marker light. Includes chrome plastic rim and foam gasket. Light a...

Fits 1" x 2.5" rectangular marker lights. This is a snap-on trim piece, only. It is not a mounting base for this style light.

This incandescent light is intended for interior use, only. Features a built-in chrome base and simple on/off switch. Measures approximately 5" dia...

New combination watermelon light inspired by an "Old School" glass lens appearance and combined with modern LED brightness. The flush mount base al...

Includes TWO replacement bumper guide tops. Light bulb and wiring harness not included. Compatible with 1" diameter bumper guides. Will not fit 3/4...

Compatible with 1" diameter bumper guides. Will not fit 3/4" diameter styles, such as Bores brand. This item is a replacement lens ONLY. Sold singl...

For a brighter style, see our LED version of this light, listed as a related item! These painted bulbs will get hot if left on for too long and cou...

Includes clear glass lens, stainless steel mounting bezel, and a premium foam rubber gasket. This is self-grounding light assembly. The 1156 style ...

This is a clear plastic replacement lens for incandescent Kenworth-style (also known as Grakon 5000) rectangular cab lights. Sold SINGLE. Mounting ...

Make your bumper guides stick out better than ever with this watermelon style lens.Compatible with 1" diameter bumper guides. Will not fit 3/4" dia...

These are clear lens, four wire lights. Includes thin foam rubber gasket and stainless steel ring, with stainless steel hardware.

Flush mount. Includes stainless steel mounting ring and hardware. These lights are all dual function with a low side and high side, plus there is a...

Hardwired with three .180 male bullet plugs, attached to about 6" of wire. Wires are white (ground) black (hot) and red (turn signal/high side). Th...

This light has a standard three-prong offset female plug built into the back - this powers the normal stop/turn/tail red functions. There is an add...

Half of the hassle of installing a lighted rear center panel comes from assembling it. Save yourself some time (and money) with our rear center pan...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

Half of the hassle of installing a lighted rear center panel comes from assembling it. Save yourself some time (and money) with our rear center pan...

This light features three bullet plugs - one ground, one hot to power the amber side, and a second hot plug to power the blue side. Both colors are...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

This light features a built-in two prong female plug in the back, which powers the amber diodes. There is an additional single male bullet plug, wh...

Measures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...