Kenworth T660 Exterior

This product fits Kenworth and Peterbilt trucks. Covers the existing tank cap for diesel exhaust fluid tank (also known as your urea tank). Sold SI...

These chrome plastic hood latch covers fit both Kenworth T660 and Peterbilt 386 trucks. They tape mount for lightning-fast peel-and-stick installat...

Fits Peterbilt 379, 386, 388, 389 and others. Fits Kenwoth T660 and W900.

This sparkling chrome plastic piece screws into and covers the existing rubber gasket. All four mounting screws are included. Optionally, you can u...

Fits W900, T600, T800 Daylite Door AND NON-Daylite Door models. Will NOT fit T2000, T680, T880, or W990 models. Includes driver's and passenger's s...

This aftermarket LED turn signal replaces the original fender light on Kenworth T660 trucks. It uses the original plug and mounts to the existing h...

These window surrounds are a trim for the windows facing the front of the truck, above the sunvisor. Fits all year model W900B, W900L, and T660 tru...

Fits Kenworth W900, T600, T800, and T660 trucks with the contoured Daylite Door (bottom of the window dips down toward the front of the door). Will...

Tape mount. Fits over the rubber gasket around the lower sleeper window. Sold SINGLE.

This extra-narrow version of the chopped look trim measures just 3" wide. These special ventshades are steadily gaining in popularity over the trad...

See this lighted handle cover on Chrome Time. Tape mount. This product fits Peterbilt 379, 386, 387, 388, and 389 trucks manufactured 2005 and new...

Sold SINGLE. This is a chrome trim for the fog light area, only. No lights included.

These flat "chopped look" door trims give you all the perks of a classic ventshade, but they do it while looking a lot more show-worthy.Tape and ri...

Mounts in-channel using double stick tape.Fits trucks with the W900-style Daylite Door, including T600, T800. Will not fit T2000, T300, and some ot...

Compatible with any 3/4" button / bullseye light - not included!

Compatible with most grommet-mount 3/4" button / bullseye lights - not included! This product is one pair of firewall-mount brackets. No lights or ...

Unfortunately, we don't have an LED replacement for this particular, super unique light. However, that doesn't mean it needs to look ugly! These ea...

Fits all Kenworth trucks with Daylite Door, including W900, T600, T660, and others. Includes driver's and passenger's side tape mount trims. "Chopp...

As often as you get in and out of the truck, you're liable to scratch your paint, no matter how cautious you are. These kick panels are an easy and...

See our installation tutorial video on YouTube.This door trim serves as a beautiful, sloping underline for your window, adding radiant shine and br...

Now, you can chrome your sleeper window to match your doors! This chopped look trim is made especially for the sleeper. Sold SINGLE. Tape mount. Ma...

The classic Kenworth logo shape, the keyhole, adds a nice touch to this replacement grill piece. This product is the LOWER grill, the piece in the ...

We have several alternative T660 bumper bezels that feature lights, but what if you don't want a light there? This solid chrome bezel has a filler ...

Fits Kenworth T660, Peterbilt 587 and 579. Fog light measures 800 lumens, powered by 6 CREE LED diodes. The LED position bar has 12 white diodes. S...

This stainless steel kick panel fits above the upper step on the T660 cab. Includes both driver's and passenger's side kick plates. Fits 2010 and n...

Protect your paint! These stainless steel kick panels are great for intercepting damage caused by boots, rocks, and whatever else you might encount...

See our installation tutorial video on YouTube.This is one of the most widely recognized stainless steel trims for Kenworth trucks. It provides a b...

This replacement visor light plugs into the OEM wiring harness on Kenworth T660 and Peterbilt 579 trucks. Also fits Kenworth T880 and T770. Mountin...

Includes driver's and passenger's side panels with 12 pre-installed 1" diameter Amber LED bullseye marker lights. Each panel measures 1.5" wide.Kic...

We have several alternative T660 bumper bezels that feature lights, but what if you don't want a light there? This solid chrome bezel has a filler ...

This replacement visor light plugs into the OEM wiring harness on Kenworth T660 and Peterbilt 579 trucks. Also fits Kenworth T880 and T770. Mountin...

This chrome panel is a much-needed replacement for the ugly black screens in your hood. Easy to install - three clips snap the grille in place and ...

Tape mount. Always clean surface with rubbing alcohol prior to application of adhesive tape! A dirty surface will not hold as well as a clean surfa...

This is an easy-to-install, "plug and play" headlight assembly, with projection style lenses. Sold SINGLE - each side is separate. Fits all year mo...

Fits 72" sleeper with wing extension. Includes driver's and passenger's side panels with 24 pre-installed 1" diameter Amber LED bullseye marker lig...

This stainless steel trim pulls double duty - protecting the front of your paint from dreaded rock chips while simultaneously accenting your grill,...

This variation on a ventshade combines the two most widely known styles - the stainless steel piece that generally goes across the top of the door,...

These chrome covers simply screw onto your valve stems. Say bye-bye to the standard black caps and get something classier. Fits any standard size v...

Two of the most popular headlight trends are combined in this "Blackout" style headlight with projection-style lenses. This is a "plug and play" he...

Includes mounting hardware. The center of this bug shield is cutout to allow access to the hand hold behind the Kenworth logo. Fits all year model ...

As often as you get in and out of the truck, you're liable to scratch your paint, no matter how cautious you are. These kick panels are an easy and...

Fits trucks with an original stainless steel factory visor with 2 mounting brackets. Will fit both one or two piece curved windshields.

These screens attach to the outside of the hood. They include the surround that goes around the air intake and logo. Logo not available!Includes bo...

Replaces OEM part number L29-1174-100. This product is a grill surround, ONLY. No center insert or logo is included.

This is a 4-piece kit. Includes driver’s and passenger’s side pieces. Fits trucks with Aero sleepers. Will not fit Studio Sleeper. 

Fits trucks with a factory fiberglass visor (or no visor), 1- or 2-piece curved windshields, and cast mirror brackets. Will not fit trucks with sta...