Incandescent Lights

Sold SINGLE. Includes stainless steel ring used for mounting this as a flush mount light. The #1156 version of this light has 1 wire and is self gr...

Mounts using existing hardware - no new screws are included. Replaces the Truck-Lite lens on many trucks - back of sleeper utility / load lights. S...

This is a clear plastic replacement lens for incandescent Kenworth-style (also known as Grakon 5000) rectangular cab lights. Sold SINGLE. Mounting ...

Includes mounting brackets, toppers, and incandescent light bulbs. 1" diameter poles. Measures 4' total - 1' up to the bend, 3' after the bend.NOTE...

In these modern times, we recommend that everyone should be running long-lasting LED turn signals, but we understand that from time to time folks h...

These 17" long fluorescent bulbs are commonly found in the sleepers of many trucks, including Peterbilt, Kenworth, Freightliner, and International....

Note: color may vary from the image shown, due to the manufacturing process of colored glass. We cannot guarantee that any two bulbs will match.

This light has a solid, die cast chrome housing. The post acts as the ground, and it has two plain wires, so it can be set up as a dual-function (m...

These small push-in bulbs are a fine temporary fix for your gauges or other small spaces.For long term changes, we suggest a 194 LED bulb. These in...

We're sure that a lot of folks would be skeptical about a donkey hood ornament - they're called Republicans. All kidding aside, this guy's a pretty...

This old-school backup light may not be as fancy as our LED styles, but it's much more affordable!

Mounts using standard 2.5" round rubber grommets - not included. This light has a built-in 2 prong female plug in the back. It requires the use of ...

Grommet mount - fits any standard oval rubber grommet. Features a built-in three prong offset female plug in the back. Dual function. As this light...

This light is typically installed inside the truck, pointed toward the corner of the windshield. It is intended to reduce glare from oncoming traff...

Mounts using standard 2.5" round rubber grommets - not included. This light has a built-in 2 prong female plug in the back. It requires the use of ...

It's very rare these days for a customer to request an incandescent light, but it does happen from time to time. Keep in mind - these lights burn o...

Sold SINGLE. Stud is ground with two wires - can function as both a marker and a turn signal.

This is an amber plastic replacement lens for incandescent Kenworth-style (also known as Grakon 5000) rectangular cab lights. Sold SINGLE. Mounting...

We really think that everyone should be using LED lights these days, but if you've got a reason to prefer incandescent, we'll still sell them to yo...

This old-school version of the Panelite M3 is incandescent - see related items for the LED style. Chrome bezel hides mounting screws. Features two ...

Includes incandescent bulbs and hot wire. The lights ground to the base. Sold in PAIRS. Compatible with 1" diameter bumper guides. Will not fit 3/4...

This single-post mount fender turn signal features a side reflector and flashy chrome rim. Sold SINGLE.This light is post-grounded with two wires -...

Fits various year model Volvo trucks with incandescent side turn signals. There are two different styles! Check your truck to be sure! This product...

Sold in PAIRS. This is a dual-function 1157 light bulb.

Measures 6" x 2". Flush mount. Dual function - works as both a marker and a turn signal. Has a three prong offset female plug in the back. Male plu...

This standard-sized, 6" x 2" oval light fits in any standard oval mounting grommet. Powered by a single incandescent bulb.

This fully-sealed, single bulb, single function incandescent marker light is commonly used as a license plate's tag light, but it may also be found...

Includes mounting brackets. 1" diameter poles. Measures 4' total - 1' up to the bend, 3' after the bend. NOTE: we recommend using some clear silic...

Sold in PAIRS. This is a dual-function 3157 light bulb.

Measures 5-5/16" x 3-1/2". Sold SINGLE. Fits incandescent turn signals that mount using one screw. For a light that mounts with 4 screws, see relat...

This heavy, die cast hood ornament is perfect for all of you renegades out there. Eyes and nose are backlit by a single 194 incandescent bulb for a...

Includes replacement lens, only. This lens fits on incandescent tiger eye/double bubble style lights. Not compatible with LED versions of this ligh...

Includes longer screws needed to mount this bezel to the light. Sold SINGLE.

This incandescent light is intended for interior use, only. Features a built-in chrome base and simple on/off switch. Measures approximately 5" dia...

Although LEDs are getting cheaper all the time, it can still be cost-prohibitive to buy white LED lights. The manufacturing process for white diode...

Bolt mount. Also available in a similar magnet mount style. Manufactured in the USA. Measures 5.5" diameter, 4.5" tall.

Fits incandescent fender turn signals, only. See related items for examples. Will not fit LED turn signals.

These are genuine Panelite lights! We purchased these from their existing stock at the time of their liquidation. These are the same lights you've ...

For a brighter style, see our LED version of this light, listed as a related item! These painted bulbs will get hot if left on for too long and cou...

Although we do occasionally get specific requests for incandescent bulbs, in general, we recommend upgrading to a more reliable, long-lasting LED b...

These are genuine Panelite lights! These are the same lights you've used for years and years, not a knockoff. Don't suffer the embarrassment of bur...

This is a replacement lens for incandescent fender turn signals, such as those found on Freightliner and Kenworth trucks. No hardware, housing, or ...

No bulb, lens, gasket, wiring, or mounting hardware included. This is a chrome plastic replica housing of the original Grakon 5000 rectangular cab ...

These incandescent lights are a cheap alternative to LEDs, if you're in a pinch. They're not as reliable, with a tendency to burn out completely an...

Original design and fit. Impact resistant polycarbonate lens provide unparalleled protection from road hazards, with resistant lens. Easy plug-in...

These incandescent lights aren't as reliable as newer LED technology, but they are a cheap alternative. A lot of times, drivers buy these to replac...

Bright, permanent mount incandescent lamp with polished reflector. 12 volt. Replacement bulbs available.Measures 5-1/4" tall by approximately 5" di...

This lens is a replacement for incandescent style lights, only. It is not intended for use on LED lights.