LED Strip and Bar Lights

Note: This light is not a flush mount light. It has a mounting tab on each end, and is intended to be installed in one of the brackets or housings ...

Fits only the lights shown as related items. No hardware required - this bezel simply snaps over your light. For extra hold, use a few dabs of sili...

This light is RED when on.These lights function at 12 volts.Converting all your incandescent lights to LED? You may want to read about LED flashers...

This slim, dual function light is a great addition to any vehicle - big rig, motorcycle, hot rod, or even a trailer. Measures approximately 17" lon...

This dual-function light works as both a marker and a turn signal - it is hard-wired with three wires, two of which (marker and turn) have .180 bul...

This unique pedestal light has a nice, low profile - great for mounting on the ends of a bumper or perhaps on a tool box. Each light functions as b...

Dual-function light - works as both a marker and a turn signal. Measures 6" (L) x 1" (W) x 1/2" (H). This is a flush mount light. Features two plai...

This unique pedestal light has a nice, low profile - great for mounting on the ends of a bumper or perhaps on a tool box. Each light functions as b...

The Dual Revolution series switches from red to white, all in one light housing, with the flip of a switch! These long, flush-mount LED lights are ...

Light sold separately. Compatible with our thin 12" long LED light bars, shown as related items. Mounts using the two adjustable width screws on th...

This long, thin strip light is perfect for interior or exterior use. It's lightweight and small enough to be mounted with double-stick tape inside ...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires. See rel...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not in...

This slim, dual function light is a great addition to any vehicle - big rig, motorcycle, hot rod, or even a trailer. Measures approximately 17" lon...

This slim, dual function light is a great addition to any vehicle - big rig, motorcycle, hot rod, or even a trailer. Measures approximately 17" lon...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

One face of this 9" long pedestal light is Amber, and the other is Red. Both lights can be removed and replaced in case of breakage or diode burnou...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires.

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardw...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

Dual-function light - works as both a marker and a turn signal. Measures 6" (L) x 1" (W) x 1/2" (H). This is a flush mount light. Features two plai...

This thin white light makes a great accent on trucks, motorcycles, even hot rods. Pair it with one of our chrome housings, shown as a related item,...

This dual-function light works as both a marker and a turn signal - it is hard-wired with three wires, two of which (marker and turn) have .180 bul...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware...

This chrome surround snaps over our 23 diode light bars, shown as related items. They should fit snugly, but if they seem loose, you can secure the...

This dual-function light works as both a marker and a turn signal - it is hard-wired with three wires, two of which (marker and turn) have .180 bul...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the red d...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This slim, dual function light is a great addition to any vehicle - big rig, motorcycle, hot rod, or even a trailer. Measures approximately 17" lon...

This turn signal is perfect for the end of a boxed-end bumper, or something a little more custom - on your street rod, perhaps? One side is Amber w...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not in...

This light bar is durable enough to withstand all kinds of exterior applications - we've seen it mounted on bumpers, down windfins, and hidden behi...

Looking for an extra-bright light bar that's perfect for any truck? This one is a big-time favorite in our store. We've seen customers use these ju...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

These slender, flush mount lights are a great addition to any truck or even smaller vehicles. Their small size means they'll fit just about anywher...

This dual-function light is hardwired with three plain wires. When this light is lit on the marker (low) side, only the outer "halo" portion is lit...

This dual-function light is hardwired with three plain wires. When this light is lit on the marker (low) side, only the outer "halo" portion is lit...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires. See rel...

Compatible with United Pacific brand 6.5" long thin LED marker/turn signal light bars - see related items. No lights included! This is the housing,...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

The best way to utilize this light is by mounting it in any of the brackets shown as Related Items. It can be used to provide a glow out from under...

The best way to utilize this light is by mounting it in any of the brackets shown as Related Items. It can be used to provide a glow out from under...