Kenworth T600 Exterior

This product is made to mount to the center of the visor and prevent excessive vibration in the visor to cause damage to the roof of the cab. The r...

This product is made to mount to the center of the visor and prevent excessive vibration in the visor to cause damage to the roof of the cab. The r...

This sparkling chrome plastic piece screws into and covers the existing rubber gasket. All four mounting screws are included. Optionally, you can u...

Fits W900, T600, T660, T800 Daylite Door AND NON-Daylite Door models of all year build. Will NOT fit T2000, T680, T880, or W990 models. Includes dr...

These flat "chopped look" door trims give you all the perks of a classic ventshade, but they do it while looking a lot more show-worthy.Tape and ri...

The chrome license plate bolts are universal - fits most major cars and trucks, including Peterbilt, Kenworth, Freightliner, International, Western...

These window surrounds are a trim for the windows facing the front of the truck, above the sunvisor. Fits all year model W900B, W900L, and T660 tru...

Sold SINGLE. Replaces the existing headlights and buckets on trucks with a dual rectangular headlight system, including Kenworth W900, Peterbilt 37...

Sold SINGLE. Replaces the existing headlights and buckets on trucks with a dual rectangular headlight system, including Kenworth W900, Peterbilt 37...

Quality injection molded plastic for durability. Beautiful chrome plated finish with triple chrome plating process. Fits various Kenworth models ...

Fits Kenworth W900, T600, T800, and T660 trucks with the contoured Daylite Door (bottom of the window dips down toward the front of the door). Will...

Fits all Kenworth trucks with Daylite Door, including W900, T600, T660, and T800. Will not fit trucks without the Daylite Door, including T680, T88...

Sold SINGLE. Fits all year model Kenworth T600 and T660 trucks.

This door trim serves as a beautiful, sloping underline for your window, adding radiant shine and breaking up the monotony of a solid paint color. ...

Tape mount. Fits over the rubber gasket around the lower sleeper window. Sold SINGLE.

This extra-narrow version of the chopped look trim measures just 3" wide. These special ventshades are steadily gaining in popularity over the trad...

These air deflectors are a cheaper and more slimline alternative to bulky ventshades. They serve the dual purpose of sweeping air away from the tru...

This product fits 24.5" diameter tanks ONLY. Before ordering, measure your tanks to ensure that you are getting the right product!The colors shown ...

Mounts in-channel using double stick tape.Fits trucks with the W900-style Daylite Door, including T600, T800. Will not fit T2000, T300, and some ot...

Now, you can chrome your sleeper window to match your doors! This chopped look trim is made especially for the sleeper. Sold SINGLE. Tape mount. Ma...

Fits all year model T660, T600, T800, and W900 trucks with a Daylite Door. Will not fit trucks without the Daylite Door, including T680, T880, and ...

Fits Kenworth W900, T600, and T800 models. Per the manufacturer, this item will fit trucks 1995-2003 ONLY. These classic stainless steel ventshades...

While this emblem trim is generally simple, the smooth pointed ends and the drop in the center add a touch of glitz and really make it stand out. T...

This tape-mount trim fits on the NON-Daylite Door, only. It will not fit the Daylite Door, which slopes down at the front rather than going straigh...

These chrome covers simply screw onto your valve stems. Say bye-bye to the standard black caps and get something classier. Fits any standard size v...

These pieces are replacements for the stock mirror backs, ONLY. This is not a full mirror. Sold SINGLE. Replaces OEM Number R59-1019-22 or R59-1010...

This standard-length chopped look fits on Kenworth trucks WITHOUT the Daylite Door, online. If your door window is straight across at the bottom, t...

Tape mount. Always clean surface with rubbing alcohol prior to application of adhesive tape! A dirty surface will not hold as well as a clean surfa...

This handle surround is made for trucks without the Daylite Door. The simple stainless ring adds class to your sleeper door without overwhelming it...

Will not fit trucks with Daylite door. This cover mounts on top of the rubber gasket using the included silicone. After installing this product usi...

This slim version of our chopped look trim gives you a modern style, but without sacrificing visibility. Includes both driver's and passenger's sid...

Fits models W900, T300, T400, T600, T800 trucks with 2 bracket setup. Will NOT fit trucks with factory fiberglass visors or with 3 bracket setup.

Includes all mounting hardware and brackets. Drilling is required to install this bug shield. It does not mount to the grill surround. The most pop...

Fits trucks with a factory fiberglass visor (or no visor), 1- or 2-piece curved windshields, and cast mirror brackets. Will not fit trucks with sta...

This variation on a ventshade combines the two most widely known styles - the stainless steel piece that generally goes across the top of the door,...

Fits Kenworth T600, T800, and W900 trucks 1989 through 2005 with a curved windshield. Will not fit flat windshield. Drilling and installation of ad...

Quality injection molded plastic for durability. Beautiful chrome plated finish with triple chrome plating process. Fits various Kenworth models ...

This simple tape-mount piece can really make your sleeper sizzle. You might not realize it, but the 1" wide strips are very powerful. Don't underes...

This "basic" drop visor is really anything but basic. The 13" drop is generally the legal limit for Kenworth trucks, and this one hugs the cab in a...

A logo surround doesn't have to be overly gaudy to do the job. Something simple with just a little dazzle, like this, can be more powerful than som...

Compatible with any sealed LED or glass lens watermelon light. Lights, wiring, and switches sold separately. Fits on 15" diameter air breather cans. 

This visor is basically a miniature version of our windshield visors. It comes as two skins, which are connected in the middle and mount across the...

Fits Kenworth T600, T800, W900 trucks with AEROCAB only. Does NOT include dimpled surround!! Measures 4-7/8" x 10-7/16". Sold SINGLE.

This classic bugshield is built especially for the T600's angular, peaked hood shape. Includes mounting hardware - angled brackets and stainless st...

Fits Kenworth W900, T600, T800, and T660 trucks with the contoured Daylite Door (bottom of the window dips down toward the front of the door). Will...

Fits Kenworth T600 with stainless steel mirror brackets. For trucks with cast mirror brackets, see SKU #12116. Works on trucks with either a 1-piec...

Features: Lights and cab panels sold separately. Includes both the driver's and passenger's side sleeper light panels. Twelve (12) light holes per...