New Arrivals

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

These lights are single function, only. They are a match for our Dual Revolution series (shown as related items), but they only light up RED.

This light's overall measurements are approximately 1" by 1-1/4", including the chrome bezel. This is a dual function (marker and turn signal) ligh...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

This light has a built in two-prong female plug in the back. There is also an additional .180 bullet-style male plug, attached by a few inches of w...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

This is a fantastic light for multiple applications - rear utility lights in the sleeper, mudflap hanger lights, and more. It is hard wired with fo...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

This light has a built-in 2 prong female plug in the back. See related items for compatible male plugs and harnesses. Also available with male .180...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red. The ad...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

These P3 marker lights are perfect for air cleaner light brackets or adding a little sparkle to a small space. The detailed chrome bezel sets this ...

This dual-function light works as both a marker and a turn signal - it is hard-wired with three wires, two of which (marker and turn) have .180 bul...

Fits Roadworks Bulls-Eye LED marker lights ONLY. Will not fit our mini button lights or other brands. This product is the bezel ONLY. Lights not in...

This light features three bullet plugs - one ground, one hot to power the red side, and a second hot to power the blue side. Both colors are a sing...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This light is a stop/turn/tail and a backup light, all in one housing! Using the standard three-prong offset plug, it will light up red. The additi...

This light is a stop/turn/tail and a backup light, all in one housing! Using the standard three-prong offset plug, it will light up red. The additi...

This light is RED, only. It is not part of the Dual Revolution series, although the similar looks make it a good pairing for those lights.

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

This is the THREE wire version of this light. See related items for the four wire style. These lights are wired with the standard two male bullet s...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

This light features a built-in two prong female plug in the back, which powers the red diodes. There is an additional single bullet plug, which is ...

This light features a built-in two prong female plug in the back, which powers the red diodes. There is an additional single bullet plug, which is ...

This light is RED, only. It is not part of the Dual Revolution series, although the similar looks make it a good pairing for those lights.

The Competition Series is a line of products intended to look good enough for the truck show, but also hold up out on the road. These stop/turn/tai...

This Smart Dynamic light is the first sequential turn signal to also function as a tail light and brake light! The built-in Smart Chip technology a...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. One face of this light is amber, and one face of this ligh...

Sold SINGLE. Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height.

This light is a stop/turn/tail and a backup light, all in one housing! Using the standard three-prong offset plug, it will light up red and functio...

This light is a stop/turn/tail and a backup light, all in one housing! Using the standard female three-prong offset plug, it will light up red, as ...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires.

This is a dual function (marker and turn signal) LED light, with one amber face and one red face. Measures 3" diameter across the face, 1-1/4" deep...

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 1-1/4" deep. Mounting stud is 1-1/2" long. 14 diodes p...

This is a dual-function light - both faces work as a marker and a turn signal. Hardwired with three plain wires. White is ground, black is hot (mar...

This light is a more affordable option for fans of Panelite's timeless M3 marker light.3" x 2", with 1-3/4" between mounting holes (measured center...

Measures 3" x 2", with 1-3/4" between mounting holes (measured center-to-center). Hardwired with two male .180 bullet plugs, connected to the back ...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. Amber on one side, Red on the other side. Sold SINGLE. See...

This light is a variation on the timeless Panelite M1, but with four times as many diodes, in their own unique diamond pattern.Electrical Hard-wir...

This version of Panelite's M1 marker light features a whopping 16 diodes - four times the amount of the original! Everything else is identical. Sam...

The timeless Panelite M1 has now been updated, with a new look that will delight drivers for years to come! The smooth Halo Glow utilizes LED diode...

Interested in the classic look of a Panelite M1 LED marker light, but discouraged by the price? This economy style will give you all of the same gr...

The M1 Generation series has all of the great features of a Panelite M1, but for a much lower price! These lights will never go out of style. They'...