New Arrivals

This is a single function light. It is effectively a single diode attached to two wires. Sold in PAIRS.

Upgrade your vehicle with the Dual Revolution Amber/Red/Purple 1.8" MINI rectangular pedestal LED light. Enjoy the convenience of a marker, turn si...

Add some extra flair to your ride with the Dual Revolution Amber/Red/Purple 1.8" MINI round pedestal LED light. Not only does it function as a mark...

6 Colors in 1 Light OE Replacement #P54-1203-100 Color Changing Switch with Memory Recall LED Projector Map Light for Reading For Kenworth Models ...

These are three wire lights - the primary color will function as only a marker light. The secondary color will only function as an auxiliary light....

The first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...

The first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...

This is a dual function light, hardwired with 4 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This is a dual function light, hardwired with 4 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

The first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...

6 Colors in 1 Light OE Replacement #16-07401 Color Changing Switch with Memory Recall LED Projector Map Light for Reading For Peterbilt Models Eas...

6 Colors in 1 Light OE Replacement #P54-1194-100 Color Changing Switch with Memory Recall Color Changing Function with Memory Recall For Kenworth ...

This light features a built-in two prong female plug in the back, which powers the red diodes. There is an additional single bullet plug, which is ...

Sold SINGLE. Designed for use with glass watermelon lens lights. Socket, wiring, base, and lens not included.

Sold SINGLE. Designed for use with glass watermelon lens lights. Socket, wiring, base, and lens not included. Lenses are pictured as an EXAMPLE ONL...

Sold SINGLE. Designed for use with glass watermelon lens lights. Socket, wiring, base, and lens not included. Lenses are pictured as an EXAMPLE ONL...

Crisp & Clean USA Flag Logo Projection 6 Colors in 1 Light OE Replacement #16-09012 Color Changing Function with Memory Recall Red Steady-On to...

Sold SINGLE. This light is intended to hook up to the OEM plugs, but if they have been altered or are missing, you can hard-wire the new light in.

Sold SINGLE. Includes a three-way (on-off-auxiliary) switch with about 8" of wire attached. Additional wire and connectors (not included) may be ne...

Replaces OEM part # P54-6069-100 (driver's side) or P54-6069-100R (passenger's side)

Sold SINGLE. This light plugs into the existing OEM plug, which powers the amber marker/turn signal function. There is an additional hot wire, conn...

Fits Kenworth T680, T700, W990, and T880. Also fits Peterbilt 567.  Sold SINGLE. Uses the OEM plug for the marker/turn signal function. There is an...

Fits Kenworth T680 and T700, as well as Peterbilt 567 and 579. The Amber function is powered by the original OEM plug, and there is a separate hot ...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

This bullseye/bullet rubber grommet is perfect for replacing only that single rubber piece instead of the entire light. It is 3/4" and fits most bu...

One side of this light is amber, the other red. There are diodes on both outside-facing ends, so the same light can be used for either driver's sid...

This light replaces the turn signal on the side of Peterbilt 379 dual rectangular headlight housings. It includes four wires - the three standard w...

One side of this light is amber, the other red. When the Dual Revolution wiring is activated, both sides burn PURPLE. Lenses are CLEAR when off. Th...

This roll of flexible interior strip lighting can be cut every 3 diodes (2" spacing) and new 18 gauge wires (not included) soldered to the ends. So...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

Measures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...

Using the standard female three-prong offset plug, the incredible Dual Revolution oval LED will light up amber, both as a marker/clearance light, a...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

This light has a built in two-prong female plug in the back. There is also an additional .180 bullet-style male plug, attached by a few inches of w...

Please note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

This light features three male bullet plugs - one ground, one hot to power the amber side, and a second hot to power the purple side. Both colors a...

This is a fantastic light for multiple applications - rear utility lights in the sleeper, mudflap hanger lights, and more. It is hard wired with fo...

Fits Roadworks Bulls-Eye LED marker lights ONLY. Will not fit our mini button lights or other brands. This product is the bezel ONLY. Lights not in...