New Arrivals

This light has a standard three-prong offset female plug built into the back - this powers the normal stop/turn/tail red functions. There is an add...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

The trucking industry has been waiting many years for an under glow lighting solution just like this one! Trux Accessories' Glow Strip under-glow l...

This is not a grommet mount light. It is a surface mount light, perfect for applications like replacing the load lights in the back of your sleeper...

This is not a grommet mount light. It is a surface mount light, perfect for applications like replacing the load lights in the back of your sleeper...

One side of this light is amber, the other red. There are diodes on both outside-facing ends, so the same light can be used for either driver's sid...

One side of this light is amber, the other red. There are diodes on both outside-facing ends, so the same light can be used for either driver's sid...

One side of this light is amber, the other red. There are diodes on both outside-facing ends, so the same light can be used for either driver's sid...

This light is a stop/turn/tail and a backup / reverse light, all in one housing! Using the standard three-prong offset plug, it will light up red a...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

One side of this light is amber, the other red. When the Dual Revolution wiring is activated, both sides burn PURPLE. Lenses are CLEAR when off. Th...

One side of this light is amber, the other red. When the Dual Revolution wiring is activated, both sides burn GREEN. Lenses are CLEAR when off. The...

One side of this light is amber, the other red. When the Dual Revolution wiring is activated, both sides burn blue. Lenses are CLEAR when off. The ...

Mounts in a 3/4" diameter hole. This light has a threaded back and includes a plastic nut for installation. It is a single-function light, hardwire...

Functions as a stop/turn/tail light, with 3 plain wire leads coming out of the back of the light. The decorative chrome bezel snaps on and hides th...

This light has a built-in 3 prong female plug on the back. This is a surface mount light - not a grommet mount.

This is a flange mount light - no grommet required. The twist-on chrome bezel hides the mounting holes. Mounting hardware not included. It has a bu...

Compatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...

Measures 6.1" overall height by 4.2" wide. This light functions as both a marker and a turn signal, and is hardwired with three plain wires. It fea...

This chrome plastic bezel is compatible with any M3 or P3 style light, but it is an exact replacement for the ribbed bezel found on the Magnum P3 l...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the red d...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

The unique "Mirage" series turn signals feature a ring of LED light around the outer edge, with a center "tunnel" visual effect that makes the ligh...

The unique "Mirage" series turn signals feature a ring of LED light around the outer edge, with a center "tunnel" visual effect that makes the ligh...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

This is a single-function LED light - works as a marker only. Includes stainless steel bezel. Mounting hardware not included.

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

This universal stainless steel rear center panel includes four "Fleet" Red 4" round 18 diode LED stop/turn/tail lights - CLEAR lens with chrome twi...

This universal stainless steel rear center panel includes four "Fleet" Red 4" round 18 diode LED stop/turn/tail lights with chrome twist-lock mount...

This set of two mudflap hangers includes six "Fleet" Red 4" round 18 diode LED stop/turn/tail lights - CLEAR lens, with chrome twist-lock mounting ...

This set of two mudflap hangers includes six "Fleet" Red 4" round 18 diode LED stop/turn/tail lights with chrome twist-lock mounting flanges. The v...

Please note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

This roll of flexible interior strip lighting can be cut every 3 diodes (2" spacing) and new 18 gauge wires (not included) soldered to the ends. So...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

Includes dual function (marker and turn signal) LED light and stainless steel mounting bezel. Sold SINGLE. Light measures approximately 3-5/16" dia...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

This is a single-function LED light - works as a marker only. Includes stainless steel bezel. Mounting hardware not included.

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...