New Arrivals

Features: This light is hard-wired with two plain wires. Chrome bezel hides mounting screws. This light is a flush mount style light. Mounting har...

Sold SINGLE. Hard-wired with three plain wires. These lights function at 12 volts.

Sold SINGLE. Hard-wired with three plain wires. These lights function at 12 volts.

These teeny tiny dash bulbs are the smallest we have. They're even smaller than a 194! Approximately 1/8" diameter. They're commonly found in small...

Sold individually. Side turn signals sold separately. Includes amber (clear lens) 14 diode LED lower dual function marker/turn signal light and mou...

***This light is much smaller than standard cab lights!***Measures 8" long x 2.5" wide, with 6.5" between mounting holes. This is a single function...

***This light is much smaller than standard cab lights!***Measures 8" long x 2.5" wide, with 6.5" between mounting holes. This is a single function...

This watermelon lens style light has a 3" diameter across the face, a 1-1/8" mounting arm, and an overall height of 4-5/8". Single-function. Hardwi...

This small, yet powerful light would work really well for an application where you need brightness, without some giant housing sticking way, way ou...

The reflectorized face of this light makes it very popular with our customers. Who doesn't love extra sparkle?This dual function (marker and turn s...

This stud-mount LED turn signal is a modern favorite. The thousands of tiny reflectors boost the already-powerful diodes, giving you the bright, pi...

These oval strobes are perfect for an oversize trailer. Instead of trying to awkwardly mount a strobe bar where it can be seen, stick a couple ligh...

Sold individually.Includes amber 14 diode LED lower dual-function (marker and turn signal) light and mounting screws for light. Existing headlight ...

Need a low-profile turn signal? This is a perfect option for the side of a bumper. It's extra bright, but it doesn't stick out as far as a more tra...

This light works as a turn signal and a marker light, and is hard-wired with three plain wires. These lights function at 12 volts.

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

Flush mount style light. Mounting hardware not included. Hard-wired with two male-end plugs (one positive, one negative), connected to the back of...

The best way to utilize this light is by mounting it in any of the brackets shown as Related Items. It can be used to provide a glow out from under...

The best way to utilize this light is by mounting it in any of the brackets shown as Related Items. It can be used to provide a glow out from under...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

These small Panelite-style marker lights are often found on air cleaner light panels, but they're also great for fender guards, visors, and even bu...

These Panelite lights are a classic staple of cab and sleeper chicken light kits. The 4-diode style is instantly recognizable by truck nuts and chr...

This temporary, magnet-mount version of the classic strobe is exceedingly popular in our store. Customers love the convenience and ease that comes ...

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is AMBER...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

This light can be mounted as a flush mount, using the rim shown as a related item, or as a grommet mount, using the grommet also shown as a related...

This dual-function light is about 4" diameter, and it is hard-wired with three plain wires. These lights function at 12 volts. The back of the ligh...

Compatible with 1" x 2.5" small rectangular marker lights - see related items for examples.

Fits 1" x 2.5" rectangular marker lights. This is a snap-on trim piece, only. It is not a mounting base for this style light.

This mounting rim is compatible with any incandescent or LED 1" x 4" rectangular marker light. Includes chrome plastic rim and foam gasket. Light a...

These LED replacement lights for the torpedo-style cab light housing are one of our most popular items. Drivers have been waiting a long time for a...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not inclu...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not incl...

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back. These...

This light is hard-wired with three plain wires. This light is AMBER when on. These lights function at 12 volts.

This light is AMBER on both sides! Although in most states in the US it is required for pedestal lights such as this to have an amber face to the f...

This turn signal is very versatile - it's as at home on your fenders, bumper, mirrors, or even tool boxes as it would be anywhere. This light is h...

This light is hard-wired with two plain wires.

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back. These light...

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back.

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back. These light...

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back. These light...