New Arrivals

This roll of flexible interior strip lighting can be cut every 3 diodes (2" spacing) and new 18 gauge wires (not included) soldered to the ends. So...

Includes dual function (marker and turn signal) LED light and stainless steel mounting bezel. Sold SINGLE. Light measures approximately 3-5/16" dia...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Requires a cab light housing or special bracket for installation. Will not flush mount on its own. This is a dual-function (marker and turn signal)...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

These lights are single function, only. They are a match for our Dual Revolution series (shown as related items), but they only light up AMBER.

This light's overall measurements are approximately 1" by 1-1/4", including the chrome bezel. This is a dual function (marker and turn signal) ligh...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

Measures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...

Using the standard female three-prong offset plug, the incredible Dual Revolution oval LED will light up amber, both as a marker/clearance light, a...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

Please note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...

This light features three male bullet plugs - one ground, one hot to power the amber side, and a second hot to power the purple side. Both colors a...

This single-function light has a built-in 2 prong female plug in the back. See related items for compatible male plugs and harnesses. Also availabl...

This light has a built-in 2 prong female plug in the back. See related items for compatible male plugs and harnesses. Also available with male .180...

Fits most trucks with the 4" x 6" dual rectangular headlight setup, including Peterbilt 379, Kenworth W900, and Freightliner Classic. Sold SINGLE.H...

This light features three male bullet plugs - one ground, one hot to power the amber side, and a second hot to power the green side. Both colors ar...

This light is AMBER, only. It is not a Dual Revolution light (see related items), although it is a perfect match for that style. The sleek chrome d...

This strobe light bar has 6 different flash styles, and a synchronization wire for hooking up several of the same light in sequence.This is NOT a f...

Features: Grommet or flange not included. Has a built-in standard three-prong female plug in the back. These lights function at 12 volts. Features:...

This dual-function light works as both a marker and a turn signal - it is hard-wired with three wires, two of which (marker and turn) have .180 bul...

Using the standard female three-prong offset plug, the incredible Dual Revolution oval LED will light up amber, both as a marker/clearance light, a...

Fits Roadworks Bulls-Eye LED marker lights ONLY. Will not fit our mini button lights or other brands. This product is the bezel ONLY. Lights not in...

This light features three bullet plugs - one ground, one hot to power the amber side, and a second hot plug to power the blue side. Both colors are...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This flashing strobe unit has 4 user-selectable patterns, which can be changed using the button on the bottom of the base. Mounts easily to our bea...

This light is AMBER, only. It is not part of the Dual Revolution series, although the similar looks make it a good pairing for those lights. Measur...

The Dual Revolution series are truly, well, revolutionary! For the first time, you can have a DOT legal light in the same housing as a color that's...

The Dual Revolution series are truly, well, revolutionary! For the first time, you can have a DOT legal light in the same housing as a color that's...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

This light features a built-in two prong female plug in the back, which powers the amber diodes. There is an additional single male bullet plug, wh...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

This roof light is something of a hybrid - it has both the rectangular shape of a Kenworth-style light, and just a hint of the round torpedo shape....

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. One face of this light is amber, and one face of this ligh...

Sold SINGLE. Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height.

This design features center diodes on top and on the face, plus an outer "Halo" glowing ring. Single function only. These lights function at 12 vol...

This design features center diodes on top and on the face, plus an outer "Halo" glowing ring. Single function only. Housing not included. These lig...

This is a dual function (marker and turn signal) LED light, with amber faces on both sides. Measures 3" diameter across the face, 1-1/4" deep. Moun...

This is a dual function (marker and turn signal) LED light, with one amber face and one red face. Measures 3" diameter across the face, 1-1/4" deep...

This is a dual function (marker and turn signal) LED light, with amber faces on both sides. Measures 3" diameter across the face, 1-1/4" deep. Moun...