Best Sellers

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

This light features extra-large 8mm "Lightning Series" diodes, for brighter output. It was specifically designed to be a great light that is afford...

This is the THREE wire version of this light. See related items for the four wire style. These lights are wired with the standard two male bullet s...

This is not a grommet mount light. It is a surface mount light, perfect for applications like replacing the load lights in the back of your sleeper...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires.

One face of this 9" long pedestal light is Amber, and the other is Red. Both lights can be removed and replaced in case of breakage or diode burnou...

Features: 48 amber diodes, 40 red diodes. This light is hard-wired with three plain wires. These lights function at 12 volts. One face of this li...

Has the Grote built in round 3-prong plug, not an offset triangular plug like most of our stop/turn/tail lights.

This rear center panel includes all LED lights as shown in photo. It has a unique under glow effect. Includes stainless steel backing plate and lic...

Most LED lights have 5mm diodes - not these Maxxima tail lights! Their 8mm diodes are almost double the size, and you can guess what that means. As...

This light is hard-wired with one three-prong female plug, connected to the back of the light by a few inches of wire. This light is made into the...

The M1 Generation series has all of the great features of a Panelite M1, but for a much lower price! These lights will never go out of style. They'...

Like the name says, this is a truly low-profile light - measuring just 1/2" deep! Perfect for air cleaner brackets, bumpers, sunvisors, and more. ...

This is Panelite's classic M3 marker light - a staple of air cleaner light panels! The chrome plastic bezel hides the mounting screws, for a smooth...

This light requires the use of either a rubber grommet or mounting flange.This light has a built-in three-prong female plug in the back.These light...

This is a dual function light, hardwired with 4 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This light is very popular! It's a great option for drivers looking to put light under their truck, or along a narrow area.This light is hardwired ...

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back. This light ...

Replacement bezel, only. Lights not included. This bezel is compatible with Panelite M3 LED or incandescent lights.

Tower diodes create a shattered beam effect Easy single stud installation utilizing 3/4" diameter hole 3-wire function with Roadworks' patented fem...

This is a single function light. It is effectively a single diode attached to two wires. Sold in PAIRS.

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This is a dual function, three wire light. It will work as a marker and a turn signal. It has a threaded back. Includes chrome bezel and plastic nut.

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

This is a dual-function, grommet mount light. Measures 5-5/16"(L) x 3-7/16(W) x 2-9/16"(T). This light requires the use of either a rubber grommet ...

This oval tail light is a great way to give your truck a shine boost. The glowing outer ring is accompanied by 6 center diodes, all powered by reli...

Grommet mount. Has a two-prong female plug built into the back. This is a single-function light, ONLY. Grommet and wiring not included.

This light features three bullet plugs - one ground, one hot to power the red side, and a second hot to power the blue side. Both colors are a sing...

This light is RED, only. It is not part of the Dual Revolution series, although the similar looks make it a good pairing for those lights.

This turn signal is perfect for the end of a boxed-end bumper, or something a little more custom - on your street rod, perhaps? One side is Amber w...

Like the name says, this is a truly low-profile light - measuring just 1/2" deep! Perfect for air cleaner brackets, bumpers, sunvisors, and more. ...

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 4-5/8" deep. Mounting stud is 1-5/8" long. 18 diodes p...

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 4-5/8" deep. Mounting stud is 1-5/8" long. 18 diodes p...

Sold SINGLE. Driver's side light has plug on the right hand side. Passenger's side has plug on the left hand side. Male plug is sold separately.

These teeny tiny dash bulbs are the smallest we have. They're even smaller than a 194! Approximately 1/8" diameter. They're commonly found in small...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

Features: This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items. This light has...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

This a 6″ oval stop, turn, and tail light. It fits industry standard mounting grommets. The lens design features our patented Lightning Optics for ...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This latest addition from Maxxima features 9 of their famous 5mm diodes behind a classic ribbed lens. This is a great light, perfect for air cleane...

Features: This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items. This light has a built...

Red LED turn signal on one side, solid chrome back on the other side. Measures 4-1/4" diameter x 2-1/2" deep. This light is hard-wired with three p...

7 Colors in 1 Light - White/Warm White/Amber/Blue/Green/Purple/Red OE Replacement Color Changing Switch with Memory Recall LED Projector Map Ligh...

This is a very popular fender turn signal. They're reasonably priced and have a long track record of reliability. We have 4" round lollipop style l...

This stud-mount LED turn signal is a modern favorite. The thousands of tiny reflectors boost the already-powerful diodes, giving you the bright, pi...