on US orders over $60
on US orders over $60 - click here for details! Some exclusions apply.
Sold SINGLE. Designed for use with glass watermelon lens lights. Socket, wiring, base, and lens not included. Lenses are pictured as an EXAMPLE ONL...
View full detailsSold SINGLE. Designed for use with glass watermelon lens lights. Socket, wiring, base, and lens not included. Lenses are pictured as an EXAMPLE ONL...
View full detailsThese are three wire lights - the primary color will function as only a marker light. The secondary color will only function as an auxiliary light....
View full detailsSold SINGLE. Designed for use with glass watermelon lens lights. Socket, wiring, base, and lens not included.
This light features three male bullet plugs - one ground, one hot to power the amber side, and a second hot to power the purple side. Both colors a...
View full detailsThis light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...
View full detailsOne side of this light is amber, the other red. When the Dual Revolution wiring is activated, both sides burn PURPLE. Lenses are CLEAR when off. Th...
View full detailsThis bullseye/bullet rubber grommet is perfect for replacing only that single rubber piece instead of the entire light. It is 3/4" and fits most bu...
View full detailsPlease note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...
View full detailsThese lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...
View full detailsThe amber turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the am...
View full detailsThe first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...
View full detailsThe first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...
View full detailsThis light has a built in two-prong female plug in the back. There is also an additional .180 bullet-style male plug, attached by a few inches of w...
View full detailsThese lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...
View full details6 Colors in 1 Light OE Replacement #P54-1194-100 Color Changing Switch with Memory Recall Color Changing Function with Memory Recall For Kenworth ...
View full detailsMeasures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...
View full detailsCrisp & Clean USA Flag Logo Projection 6 Colors in 1 Light OE Replacement #16-09012 Color Changing Function with Memory Recall Red Steady-On to...
View full detailsThis is a fantastic light for multiple applications - rear utility lights in the sleeper, mudflap hanger lights, and more. It is hard wired with fo...
View full details6 Colors in 1 Light OE Replacement #16-07401 Color Changing Switch with Memory Recall LED Projector Map Light for Reading For Peterbilt Models Eas...
View full detailsThe first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...
View full detailsUsing the standard female three-prong offset plug, the incredible Dual Revolution oval LED will light up amber, both as a marker/clearance light, a...
View full detailsSold SINGLE. This light plugs into the existing OEM plug, which powers the amber marker/turn signal function. There is an additional hot wire, conn...
View full detailsThe amber turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the am...
View full details6 Colors in 1 Light OE Replacement #P54-1203-100 Color Changing Switch with Memory Recall LED Projector Map Light for Reading For Kenworth Models ...
View full detailsThese lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...
View full detailsFits Kenworth T680, T700, W990, and T880. Also fits Peterbilt 567. Sold SINGLE. Uses the OEM plug for the marker/turn signal function. There is an...
View full detailsThis is a flush-mount light that can be installed anywhere. Measures 3.5" diameter, 3" deep. Includes 4 wires with male bullet plug ends. The red l...
View full detailsThis light replaces the turn signal on the side of Peterbilt 379 dual rectangular headlight housings. It includes four wires - the three standard w...
View full detailsThe red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...
View full detailsFits Roadworks Bulls-Eye LED marker lights ONLY. Will not fit our mini button lights or other brands. This product is the bezel ONLY. Lights not in...
View full detailsOne side of this light is amber, the other red. There are diodes on both outside-facing ends, so the same light can be used for either driver's sid...
View full detailsThese lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...
View full detailsReplaces OEM part # P54-6069-100 (driver's side) or P54-6069-100R (passenger's side)
Fits Kenworth T680 and T700, as well as Peterbilt 567 and 579. The Amber function is powered by the original OEM plug, and there is a separate hot ...
View full details1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...
View full detailsMeasures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...
View full detailsThis is a single function light. It is effectively a single diode attached to two wires. Sold in PAIRS.
This is a dual function light, hardwired with 4 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...
View full detailsThis roll of flexible interior strip lighting can be cut every 3 diodes (2" spacing) and new 18 gauge wires (not included) soldered to the ends. So...
View full detailsAdd some extra flair to your ride with the Dual Revolution Amber/Red/Purple 1.8" MINI round pedestal LED light. Not only does it function as a mark...
View full detailsSold SINGLE. Includes a three-way (on-off-auxiliary) switch with about 8" of wire attached. Additional wire and connectors (not included) may be ne...
View full detailsThis light features a built-in two prong female plug in the back, which powers the red diodes. There is an additional single bullet plug, which is ...
View full detailsThese lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...
View full detailsIt's extremely unusual to find a light this small that has been designed to withstand outdoor weather conditions. Those two attributes have made ou...
View full detailsUpgrade your vehicle with the Dual Revolution Amber/Red/Purple 1.8" MINI rectangular pedestal LED light. Enjoy the convenience of a marker, turn si...
View full detailsThis is a dual function light, hardwired with 4 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...
View full details