Best Sellers

Sold individually. Includes amber (clear lens) 14 diode LED lower turn signal light and mounting screws for light. Existing headlight bezel bolts w...

Flush mount style light. Mounting hardware not included. Hard-wired with two male-end plugs (one positive, one negative), connected to the back of...

This dual-function light is about 4" diameter, and it is hard-wired with three plain wires. These lights function at 12 volts. The back of the ligh...

These arrow-style lights make great turn signals. Each section lights up sequentially, adding one row, two rows, three rows, four, and then the ent...

This strobe light bar has 6 different flash styles, and a synchronization wire for hooking up several of the same light in sequence.This is NOT a f...

***This light is much smaller than standard cab lights!***Measures 8" long x 2.5" wide, with 6.5" between mounting holes. This is a single function...

This light has a standard three-prong offset female plug built into the back - this powers the normal stop/turn/tail red functions. There is an add...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

This replacement load light is a great way to update the back of your sleeper. You'll increase your visibility, too. Most stock utility lights in t...

Sold individually. Side turn signals sold separately. Includes amber 14 diode LED lower marker/clearance/turn signal light and mounting screws for ...

These oval strobes are perfect for an oversize trailer. Instead of trying to awkwardly mount a strobe bar where it can be seen, stick a couple ligh...

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

These easy-to-install lights create a beautiful glow inside your air cleaner cans. Simply stick them inside the top of the can, hook them up to pow...

9 diodes. Crush proof, 4 different functions. Battery powered - requires 3 AAA batteries (not included).

Sold SINGLE. This light plugs into the existing OEM plug, which powers the amber marker/turn signal function. There is an additional hot wire, conn...

Fits Kenworth T680 and T700, as well as Peterbilt 567 and 579. The light is powered by the original OEM plug. Sold SINGLE.

This watermelon lens style light has a 3" diameter across the face, a 2-1/8" mounting arm, and an overall height of 5-3/4". Single-function. Hardwi...

This is a three-wire light. Can be used as both a marker and turn signal. Sold SINGLE.

This round, pedestal light version of our "Halo" LED turn signal features a high diode count along with the signature glowing outer ring. The outer...

Measures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...

This grommet-mount light is anything but standard. The glowing outer ring gives you the strength and endurance of an LED light, with a brand-new ty...

Measures 6.1" overall height by 4.2" wide. This light functions as both a marker and a turn signal, and is hardwired with three plain wires. It fea...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. Amber on one side, Red on the other side. Sold SINGLE. See...

This light is too nice to be considered average, but not too fancy to be unobtainable! It strikes an excellent balance.Features: This light has a ...

Features: This light is hard-wired with two plain wires. Chrome bezel hides mounting screws. This light is a flush mount style light. Mounting har...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

This flashing strobe unit has 4 user-selectable patterns, which can be changed using the yellow wire. Mounts easily to our beacon brackets or mirro...

Sold SINGLE. Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height.

Measures 6" L x 2" W x 1-5/8" H. This light is a flush mount style light. Mounting hardware not included. These lights function at 12 volts.

While most lights only have diodes pointing straight out, these have a unique feature that most millennium-style lights cannot boast - diodes that ...

American Superlite makes a simple, no-nonsense marker light that's perfect for any application. Their famous lens design ensures that your lights w...

This light is hard-wired with two male-end plugs (one positive, one negative), connected to the back of the light by a few inches of wire.

Sold SINGLE. This is a single function light, hardwired with two wires. The included 1157 LED bulb can be replaced.

Replaces OEM part # P54-6069-100 (driver's side) or P54-6069-100R (passenger's side)

Sold SINGLE. This light plugs into the existing OEM plug, which powers the amber marker/turn signal function. There is an additional hot wire, conn...

These lights are great for mounting to mirror arms, on the ends of your bumper, or anywhere else with space for the simple, single mounting bolt.Th...

Sometimes, you can get away with just replacing bulbs. But, when it's time to move up to a whole new housing, don't sell your soul to the dealershi...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

This slender clearance light is curved and ribbed on top, making the 7 diodes inside look like one long, solid line of light. The small shape lends...

One side of this light is amber, the other red. There are diodes on both outside-facing ends, so the same light can be used for either driver's sid...

This light is a park/turn/clearance and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up AMBER ...

This is a dual-function light - both faces work as a marker and a turn signal. Hardwired with three plain wires. White is ground, black is hot (mar...

These lights are single function, only. They are a match for our Dual Revolution series (shown as related items), but they only light up AMBER.

This is a dual function (marker and turn signal) LED light, with amber faces on both sides. Measures 3" diameter across the face, 1-1/4" deep. Moun...

Dual function with three plain wires - will work as both a marker and turn signal. Includes chrome plastic bezel. Measures 6"(L) x 2"(W) x 1-1/8"(H...

These lights, which are specifically designed to fit on the top rail of your trailer, feature a wide-angle diode pattern for maximum visibility.Fea...

This standard-size, flange-mount turn signal features a large bubble hump in the center for increased visibility. Perfect for truck and trailer app...