Products

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

The red turn signal is a dual-function light. There are three wires, all attached to .180 male bullet plugs.  Includes mounting ring. Sold SINGLE.

The red turn signal is a dual-function light. There are three wires, all attached to .180 male bullet plugs.  Includes mounting ring. Sold SINGLE.

This is a three-wire light. Can be used as both a marker and turn signal. Sold SINGLE.

Measures 6-1/2" overall width, 5" overall height. Lights are 3.5" diameter, cab light-style lights. Sold SINGLE. This is a heavy light, so we recom...

Sold in PAIRS. This is a dual-function 1157 light bulb.

These small push-in bulbs are a fine temporary fix for your gauges or other small spaces.For long term changes, we suggest a 194 LED bulb. These in...

Sold in PAIRS. This is a dual-function 3157 light bulb.

Although we do occasionally get specific requests for incandescent bulbs, in general, we recommend upgrading to a more reliable, long-lasting LED b...

Each light functions and both a marker / clearance light and turn signal or auxiliary light. Mounts in a 3/4" diameter hole.

This bulb has an 1156-style round base with a single contact on the bottom. Fits North American Signal Light brand BBP, TR 1/2, and MIP series ligh...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This long, thin strip light is perfect for interior or exterior use. It's lightweight and small enough to be mounted with double-stick tape inside ...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not incl...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardw...

9 diodes. Crush proof, 4 different functions. Battery powered - requires 3 AAA batteries (not included).

No other components included. This is a replacement glass lens, ONLY.

This small, 3 diode light is perfect for adding a subtle glow to your truck. Great for interior or exterior applications. Functions as a marker, on...

This bullseye/bullet rubber grommet is perfect for replacing only that single rubber piece instead of the entire light. It is 3/4" and fits most bu...

Currently, we have demo videos for both the blue and red version of this light. Keep scrolling down to see them both! These are dual-voltage lig...

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is AMBER...

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is RED w...

Includes mounting hardware. Sold SINGLE.

Sometimes you need just a little more light power, and when that is the case you can rely on this light here. Dependable and bright, it's like a on...

Delivering style while facilitating visibility, these new LED side marker lights include 6 high power SMDs per direction. Not only do these lights ...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This light can be mounted as a flush mount, using the rim shown as a related item, or as a grommet mount, using the grommet also shown as a related...

This flush mount style light is one of our all-time classic favorites. It never goes out of style, and it's really easy to match.Features: Include...

This strobe light bar has 6 different flash styles, and a synchronization wire for hooking up several of the same light in sequence.This is NOT a f...

Fully sealed, fits existing Trucklite cab light housing.This light is hard-wired with two male-end plugs (one positive, one negative), connected to...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

Length 14.00", Height 8.25", Depth 1.75" Mounting: Magnetic and Surface Mounting Kits Included Connector: Cigarette Adapter with 15 Foot Cable

***This light is much smaller than standard cab lights!***Measures 8" long x 2.5" wide, with 6.5" between mounting holes. This is a single function...

So you want to switch your cab lights over to LED, but you're not interested in a "plain jane" look. These reflectorized lights are the way of the ...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

Requires a cab light housing or special bracket for installation. Will not flush mount on its own. This is a dual-function (marker and turn signal)...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

Includes dual function (marker and turn signal) LED light and stainless steel mounting bezel. Sold SINGLE. Light measures approximately 3-5/16" dia...

Want to install some great-looking LED cab lights but your housings are old and busted? Here's your solution - buy this complete kit as a well-dese...

These LED replacement lights for the torpedo-style cab light housing are one of our most popular items. Drivers have been waiting a long time for a...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires. See rel...