Maxxima

This is a 196" long red LED, adhesive-mounted flexible strip light. This heavy-duty, commercial-grade light is built for on-highway applications an...

Both ends have male plugs - one two-prong end, and one end with two .180 bullet-style plugs. Sold SINGLE.

This amazing module allows for the installation of 12 volt LED lighting on 24 volt vehicles. Just install the module at the head of the 24V DC ligh...

This is a male 5-pin metripack connector plug for our Maxxima LED tail light/backup lights. May also fit other brands.

This is a 196" long red LED, adhesive-mounted flexible strip light. This heavy-duty, commercial-grade light is built for on-highway applications an...

Length 14.00", Height 8.25", Depth 1.75" Mounting: Magnetic and Surface Mounting Kits Included Connector: Cigarette Adapter with 15 Foot Cable

This trailer-style turn signal light is one great deal. The eight 5mm diodes are assisted by a reflector for maximum visual impact. Mounting holes ...

Fits 1" x 2.5" rectangular marker lights. Lights ground to the base, and the base has one hot wire to be hooked into your harness or spliced in.

This 4" diameter accessory strobe light is perfect in a pinch. It's completely self-contained, no wiring needed. Just flip it on and you're instant...

This 3-pin female Delphi plug is an OEM replacement for the Freightliner Cascadia side turn signal. It is compatible with the lights shown below as...

Sold SINGLE. Hard-wired with two plain wires. Does not include factory plug. Dimensions: 5.75"L x 1.8"W x 1.1"D Mounting: 2 Hole Surface, 4.9" cent...

Sold SINGLE. Hard-wired with two plain wires. Does not include factory plug. Dimensions: 5.75"L x 1.8"W x 1.1"D Mounting: 2 Hole Surface, 4.9" cent...

This is a replacement light for the OEM side turn signal on Freightliner Cascadia. Sold SINGLE. See related items for the accompanying plug.

This continuous wire harness uses 2 prong plugs and has approximately 12" of wire from center to center of neighboring plugs. Approximately 6" of w...

Compatible with our 3.8" Maxxima strobes. Sold SINGLE.

This heavy-duty light mounting flange works best with Maxxima brand lights. It may fit other brands, but some will be too large or too small to fit...

This light can be mounted as a flush mount, using the rim shown as a related item.Using the mounting rim will not require the use of the grommet. T...

This is a flush mount light which requires the use of a mounting rim, such as the ones shown as a related item. This light has a built-in two-prong...

This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items.This light has a built-in two-prong m...

Maxxima's marker lights are always popular with truckers. They're reliable and they look great. This pattern features 6 of Maxxima's 5mm Vantage ...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

This dual-function light has all of the perks you'd expect from Maxxima - bright diodes, reliable quality, plus a major bonus - it will function in...

This latest addition from Maxxima features 9 of their famous 5mm diodes behind a classic ribbed lens. This is a great light, perfect for air cleane...

Features: Measures 6-1/2" x 2" x 3/4" with 4-1/2" mounting hole centers. Please note: This light does not have ribs as shown in the dimension ...

These oval strobes are perfect for an oversize trailer. Instead of trying to awkwardly mount a strobe bar where it can be seen, stick a couple ligh...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

This flange is the best match for Maxxima oval LED turn signals. It may also fit other brands, but it is not manufactured for them. Does NOT includ...

This light can be mounted as a flush mount, using the rim shown as a related item. Using the mounting rim will not require the use of the grommet. ...

Features: This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items. This light has...

Features: This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items. This light has a built...

Measures 2-15/16" x 1-15/16" x 1/2" with 2-3/8" mounting hole centers. Chrome bezel hides mounting screws. This light is a flush mount style light,...

Maxxima's marker lights are always popular with truckers. They're reliable and they look great. This pattern features 6 of Maxxima's 5mm Vantage ...

Maxxima's marker lights are always popular with truckers. They're reliable and they look great. This pattern features 6 of Maxxima's 5mm Vantage se...

Features: This light is a flush mount style light. Single function. Mounting hardware not included. This light is hard-wired with one eyelet an...

This light requires the use of either a rubber grommet or mounting flange.This light has a built-in three-prong female plug in the back.These light...

If you want a little more sparkle than our economy lights but you still don't want to spend your entire budget, these 44 diode lights make a great ...

This light is a dual-voltage version of our SKU #11838, shown as a related item. It will work in both 12- and 24-volt systems, with no additional w...

We featured this light in Chrome Time Webisode 3.Features: Fits any standard 4" rubber grommet or mounting flange. Built-in three-prong female plug...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

This latest addition from Maxxima features 9 of their famous 5mm diodes behind a classic ribbed lens. This is a great light, perfect for air cleane...

This magnetic strobe is cheap enough for a one-time trip but durable enough for drivers who do oversize loads all the time.Features: 3 functions -...

Measures 6-1/2" x 2" x 3/4" with 4-1/2" mounting hole centers. Chrome bezel hides mounting screws. This light is a flush mount style light. Mountin...

Measures 6-1/2" x 2" x 3/4" with 4-1/2" mounting hole centers. Chrome bezel hides mounting screws. This light is a flush mount style light. Mountin...

This fantastic Maxxima light features a simple, mostly untextured lens. Each diode shines through like a knife cutting through fog. A few small bum...

This a 6″ oval stop, turn, and tail light. It fits industry standard mounting grommets. The lens design features our patented Lightning Optics for ...

This light features extra-large 8mm "Lightning Series" diodes, for brighter output. It was specifically designed to be a great light that is afford...