New Arrivals

This is an exceptionally low-profile marker light. While most lights of this style are nearly an inch tall, this one measures in at 1/4" - almost i...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

Features: This light is hard-wired with two plain wires. Chrome bezel hides mounting screws. This light is a flush mount style light. Mounting har...

Measures 6" x 2". Flush mount. Dual function - works as both a marker and a turn signal. Has a three prong offset female plug in the back. Male plu...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

We've seen our customers use this light for countless applications - on recreational trailers, Freightliner windfins, motorcycles, truck hoods, and...

Flush mount style light. Mounting hardware not included. Hard-wired with two male-end plugs (one positive, one negative), connected to the back of...

Flush mount style light. Mounting hardware not included. Hard-wired with two male-end plugs (one positive, one negative), connected to the back of...

This light is RED when on.These lights function at 12 volts.Converting all your incandescent lights to LED? You may want to read about LED flashers...

Note: This light is not a flush mount light. It has a mounting tab on each end, and is intended to be installed in one of the brackets or housings ...

The best way to utilize this light is by mounting it in any of the brackets shown as Related Items. It can be used to provide a glow out from under...

The best way to utilize this light is by mounting it in any of the brackets shown as Related Items. It can be used to provide a glow out from under...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This is Panelite's classic M3 marker light - a staple of air cleaner light panels! The chrome plastic bezel hides the mounting screws, for a smooth...

These small Panelite-style marker lights are often found on air cleaner light panels, but they're also great for fender guards, visors, and even bu...

This genuine Panelite millennium-style M1 light is one of the most popular LED lights, ever. Even now that Panelite is out of business, we have a h...

This genuine Panelite millennium-style M1 light is one of the most popular LED lights, ever. Even now that Panelite is out of business, we have a h...

These Panelite lights are a classic staple of cab and sleeper chicken light kits. The 4-diode style is instantly recognizable by truck nuts and chr...

This thick, rubber/foam mounting gasket is a must-have to ensure proper fit and to protect your light from water and corrosion. It evens out the cu...

Measurements: 6"(L) x 2"(W) x 1-5/8"(H). These lights function at 12 volts.This light is a flush mount style light. Mounting hardware not included....

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is RED w...

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is AMBER...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

This light can be mounted as a flush mount, using the rim shown as a related item, or as a grommet mount, using the grommet also shown as a related...

Each package includes one gasket and one 3-3/8" diameter o-ring. Fits on most Grakon 1000 torpedo-style cab / watermelon lights.

Compatible with 1" x 2.5" small rectangular marker lights - see related items for examples.

Fits 1" x 2.5" rectangular marker lights. This is a snap-on trim piece, only. It is not a mounting base for this style light.

This lens is a replacement for incandescent style lights, only. It is not intended for use on LED lights.

This mounting rim is compatible with any incandescent or LED 1" x 4" rectangular marker light. Includes chrome plastic rim and foam gasket. Light a...

These LED replacement lights for the torpedo-style cab light housing are one of our most popular items. Drivers have been waiting a long time for a...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not inclu...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not incl...

5-7/8" x 2". Measures 4-3/4" between mounting holes.This light is a flush mount style light. Mounting hardware not included.This light is hard-wire...

This dual-function light is a popular choice for all kinds of vehicles - trucks, motor homes, even trailers. It requires the use of a mounting rim,...

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardw...

This light is a fresh take on the timeless 12 diode Peterbilt-style marker light. It has a reflectorized backing, which adds just the perfect amoun...