New Arrivals

This standard-size, grommet-mount turn signal features a large bubble hump in the center for increased visibility. Perfect for truck and trailer ap...

Sold in PAIRS. This is a dual-function 1157 light bulb. The color of these bulbs may vary. The color will eventually burn off of the glass or chang...

This bullseye/bullet rubber grommet is perfect for replacing only that single rubber piece instead of the entire light. It is 3/4" and fits most bu...

This is a dual-function light - both faces work as a marker and a turn signal. Hardwired with three plain wires. White is ground, black is hot (mar...

Includes chrome bezel and rubber mounting grommet. This is a single-function light with two .180 male bullet plugs.

Compatible with our 3.8" Maxxima strobes. Sold SINGLE.

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

This sequential style differs from a standard turn signal in that the light bar flashes from left to right (driver's side) or right to left (passen...

Mounts in a 3/4" diameter hole. This light has a threaded back and includes a plastic nut for installation. It is a single-function light, hardwire...

Compatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...

Measures 6.1" overall height by 4.2" wide. This light functions as both a marker and a turn signal, and is hardwired with three plain wires. It fea...

This chrome plastic bezel is compatible with any M3 or P3 style light, but it is an exact replacement for the ribbed bezel found on the Magnum P3 l...

This is a beacon light, NOT a strobe. It flashes much more slowly than a strobe and is intended for use only as a beacon. Hardwired with two plain ...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a flush mount base, allowin...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Note: color may vary from the image shown, due to the manufacturing process of colored glass. We cannot guarantee that any two bulbs will match.

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This light's overall measurements are approximately 1" by 1-1/4", including the chrome bezel. This is a dual function (marker and turn signal) ligh...

This single-function light has a built-in 2 prong female plug in the back. See related items for compatible male plugs and harnesses. Also availabl...

This dual-function light works as both a marker and a turn signal - it is hard-wired with three wires, two of which (marker and turn) have .180 bul...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This flashing strobe unit has 4 user-selectable patterns, which can be changed using the button on the bottom of the base. Mounts easily to our bea...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

This roof light is something of a hybrid - it has both the rectangular shape of a Kenworth-style light, and just a hint of the round torpedo shape....

Sold SINGLE. Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height.

This design features center diodes on top and on the face, plus an outer "Halo" glowing ring. Single function only. Housing not included. These lig...

This is a dual function (marker and turn signal) LED light, with amber faces on both sides. Measures 3" diameter across the face, 1-1/4" deep. Moun...

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 1-1/4" deep. Mounting stud is 1-1/2" long. 14 diodes p...

This light has two bulbs inside, and mounts using a chrome base - shown as a related item. Also see related items for an upgrade to LED!

Mounts using standard 2.5" round rubber grommets - not included. This light has a built-in 2 prong female plug in the back. It requires the use of ...

This is a dual-function light - both faces work as a marker and a turn signal. Hardwired with three plain wires. White is ground, black is hot (mar...

Bolt mount. Also available in a similar magnet mount style. Manufactured in the USA. Measures 5.5" diameter, 4.5" tall.

Magnetic mount. Plugs into a cigarette lighter for truly temporary use. Also available in a similar bolt mount style. Manufactured in the USA. Meas...

Measures 3" x 2", with 1-3/4" between mounting holes (measured center-to-center). Hardwired with two male .180 bullet plugs, connected to the back ...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires. See rel...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. Amber on one side, Red on the other side. Sold SINGLE. See...

This light is a version of the M1 LED, but with FOUR times as many diodes! Everything else is identical to Panelite's original. Same chrome bezel, ...

The timeless Panelite M3 has now been updated, with a new look that will delight drivers for years to come! The smooth Halo Glow utilizes LED diode...

The timeless Panelite M1 has now been updated, with a new look that will delight drivers for years to come! The smooth Halo Glow utilizes LED diode...

The M1 Generation series has all of the great features of a Panelite M1, but for a much lower price! These lights will never go out of style. They'...

Measures 6-1/2" overall width, 5" overall height. Lights are 3.5" diameter, cab light-style lights. Sold SINGLE. This is a heavy light, so we recom...

This ultra-thin (1-1/4" deep) light has 7 different selectable flash patterns - a rarity among 4" round grommet mount lights! It can also be set on...

Includes chrome bezel. Sold SINGLE. This is a single function light, hardwired with two plain wires.Measures 6-5/8" by 2-1/4", with 4" between moun...