New Arrivals

This light features the original plug and does not require new wiring, if the OEM wiring is still intact and functional. Sold SINGLE.

This standard-size, flange-mount turn signal features a large bubble hump in the center for increased visibility. Perfect for truck and trailer app...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

It meets SAE J845 Class 1A requirements and offers 12 selectable flash patterns. It operates at 12 and 24 VDC, and features a durable, impact-resis...

Includes lens, light housing, incandescent bulb, and stainless steel bezel. This light is a simple replacement that will work temporarily if you're...

This light is a direct replacement for the back-of-mirror light found on many older trucks, including Peterbilt 379, Kenworth W900, and Freightline...

Bolt mount. Also available in a similar magnet mount style. Manufactured in the USA. Measures 5.5" diameter, 4.5" tall. Hardwired with plain wires....

Cigarette lighter plug. Mounts easily to our beacon brackets or mirror mount bracket - see related items. Measures 5" tall by 6.5" diameter. Sold S...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

Sold SINGLE. This is a single function light, hardwired with two wires. The included 1157 LED bulb can be replaced.

Flush mount. Includes stainless steel mounting ring and hardware. These lights are all dual function with a low side and high side.

Grommet mount. Has a two-prong female plug built into the back. This is a single-function light, ONLY. Grommet and wiring not included.

Each light functions and both a marker / clearance light and turn signal or auxiliary light. Mounts in a 3/4" diameter hole.

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 4-5/8" deep. Mounting stud is 1-5/8" long. 18 diodes p...

Fits all standard 2" rubber grommets or mounting flanges. Built-in two-prong female plug These lights function at 12 volts.

Includes lens, light housing, incandescent bulb, and stainless steel bezel. This light is a simple replacement that will work temporarily if you're...

Surface mount, measures 4" x 2" x 1". This light is a flush mount style light. Mounting hardware not included. This light is hard-wired with three ...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This little strobe is quite the impressive powerhouse! Don't let the slim profile fool you - a lot of light comes out of these 4 high-powered diode...

New combination watermelon light inspired by an "Old School" glass lens appearance and combined with modern LED brightness. The flush mount base al...

Wired with OEM factory plug, plus an additional 0.180 bullet plug. Light measures 5-5/16" L x 2-3/8" W x 11/16" H.

This flashing strobe unit has 4 user-selectable patterns, which can be changed using the yellow wire. Mounts easily to our beacon brackets or mirro...

There are three wires, all attached to a .180 male bullet plug. The ground wire operates both the primary and secondary functions. Includes mountin...

There are three wires, all attached to a .180 male bullet plug. The ground wire operates both the primary and secondary functions. Includes mountin...

There are three wires, all attached to a .180 male bullet plug. The ground wire operates both the primary and secondary functions. Includes mountin...

Hardwired with three .180 male bullet plugs, attached to about 6" of wire. Wires are white (ground) black (hot) and red (turn signal/high side). Th...

No other components included. This is a replacement glass lens, ONLY.

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This extra-large light measures 7-7/8" long by 3-11/16" tall by 1-1/8" deep. It is a dual function light, meaning it can be used as both a marker a...

This is a single-function 2 wire light.

Grote's SuperNova® Sealed Turtleback® II LED Clearance Marker Lights have encapsulant potting for total circuit-board protection and meets PC funct...

Measures 7.75" overall width, 5" overall height. Lights are 3.5" diameter, cab light-style lights. Sold SINGLE. This is a heavy light, so we recomm...

Sold SINGLE. Includes stainless steel ring used for mounting this as a flush mount light. The #1156 version of this light has 1 wire and is self gr...

22″ Length 9ft Long Coil Wiring Amber Lens w/ Amber LEDs 12-24V 100W 10 Flash Patterns 4 Magnetic Mounts Cigarette Plug Controller

This light replaces the stock cab/visor light found on Cascadia trucks. Single-function, hard-wired with two plain wires. Sold SINGLE. Installs usi...

9 diodes. Crush proof, 4 different functions. Battery powered - requires 3 AAA batteries (not included).

This is an amber plastic replacement lens for incandescent Kenworth-style (also known as Grakon 5000) rectangular cab lights. Sold SINGLE. Mounting...

Sold SINGLE. The included LED turn signals are dual function - hardwired with three wires.  Replaces OEM part # L46-6062 and L46-6062R.

This light has the same optics as a glass lens incandescent, but with the reliable durability of a sealed acrylic housing! Mounts in the same 3/4" ...

Sold SINGLE. Plugs into the OEM connector.

This standard-size, grommet-mount turn signal features a large bubble hump in the center for increased visibility. Perfect for truck and trailer ap...

Includes mounting hardware. Sold SINGLE.

Sold SINGLE. Includes stainless steel ring used for mounting this as a flush mount light. This is a 3-wire light - functions as a marker and a turn...

This is a dual function light - works as both a marker and a turn signal. The chrome bezel hides the mounting screws (included). Hardwired with 3 w...

Sold SINGLE. Stud is ground with two wires - can function as both a marker and a turn signal.