on US orders over $60
on US orders over $60 - click here for details! Some exclusions apply.
This is a small chrome plastic frame to fit around the rocker switches on your dash. Adhesive mount. Each pack includes two switch trims.
This light is a stop/turn/tail and a backup / reverse light, all in one housing! Using the standard three-prong offset plug, it will light up red a...
View full detailsThese lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...
View full detailsThe amber turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the am...
View full detailsMade from lightweight, durable poly-rubber blend material. Sold SINGLE. Logos not included. Truck logos are only available through authorized Kenwo...
View full detailsThis "suicide knob" includes all of the mounting hardware you need. It should fit on any steering wheel, unless your wheel's rim has an unusually l...
View full detailsMeasures approximately 70" wide by 28" tall. Mounts using included suction cups. Fits Freightliner Cascadia models 2008 through 2018.
Finally, the Cascadia-driving chrome addicts of the world can enjoy the dazzling chopped look-style flat ventshades. Courtesy of our shop techs and...
View full detailsCompatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...
View full detailsThis piece is a cover for the existing knob. It is NOT a full replacement knob. Fits Peterbilt trucks including 386, 388, and 389, year model 2006 ...
View full detailsFits Peterbilt models 325, 330, 335, 337, 340, 347, 348, 357, 365, 367, 375, 377, 378, 379, 382, 384, 385, 388, and 389 trucks - year models 2006 a...
View full detailsSold SINGLE. Replaces the existing headlights and buckets on trucks with a dual rectangular headlight system, including Kenworth W900, Peterbilt 37...
View full detailsIncludes two adjustable rear supports for full or half fenders.
Sold SINGLE. This is a vinyl logo sticker, not a full replacement emblem. It is intended for use on its own - not in conjunction with the existing ...
View full detailsThis replacement visor light plugs into the OEM wiring harness on Kenworth T680 and Peterbilt 579 trucks. Also fits Kenworth T880 and T770. Mountin...
View full detailsFits around the brake knobs and switches on the lower center dash control panel. See related items for trucks with 4 switches in the lower right po...
View full detailsThis is the "chopped look" ventshade style door trim for the upper door. Does not include the lower trim under the window. Fits Peterbilt 567, 579,...
View full detailsThis lightweight extension features an extra-long collar, measuring 1". Overall length is 5-1/8". Sold SINGLE. See related items for other styles a...
View full detailsFits on most steering wheel brands. If your steering wheel measures 17-3/4" or 18" diameter, this steering wheel cover should fit. They are made to...
View full detailsThis 2" drop visor is a neat little novelty for your license plate. Mounts to the top two mounting holes using hidden tabs under the visor. Include...
View full detailsThe Flatline-style lights in this bezel have 50 amber diodes, total. Functions as both a marker and a turn signal. All of the individual lights are...
View full detailsThese P3 marker lights are perfect for air cleaner light brackets or adding a little sparkle to a small space. The detailed chrome bezel sets this ...
View full detailsFits International trucks. Unlike most of our small nut covers, these are completely round and smooth on the inside.2-1/8" tall.
This short axle cover is something of a hybrid between a hubcap and a traditional axle cover. It covers the top of the axle, but doesn't go all the...
View full detailsIn these modern times, we recommend that everyone should be running long-lasting LED turn signals, but we understand that from time to time folks h...
View full detailsThe Peterbilt logo-shaped punch pattern of this screen accentuates the Peterbilt logo in a refined manner. The extra shimmer looks brilliant in the...
View full detailsThis 2-piece product replaces your existing steering column cover. Fits newer Freightliner trucks. Includes "leather" rear flap.
Rocker switch not included.These curvy rocker switch plates have cutouts so you can still see the switch function. Snaps over Freightliner Century/...
View full detailsDelphi/weatherpack style plug on one end, approximately 6" of plain wires on the other end. Sold SINGLE.
Sold in PAIRS. See related items for 6mm options.
Replace your boring old lighter with a better, chromed out version of itself. Even if you never use the lighter, it's still on your dash. Turn it i...
View full detailsNot sure how to install your hubcaps? Let the Chroman show you how!This chrome pointed hubcap comes with a "spinner" style knock-off already attach...
View full detailsUnlike any other surface or hood mount mirror available, "POD MOUNT" eliminates the potential danger and inconvenience of having to raise the hood ...
View full detailsCompatible with 1" diameter bumper guides. Will not fit 3/4" diameter styles, such as Bores brand. This item is a replacement lens ONLY. Sold singl...
View full detailsThis economy-style gear shift knob is an affordable alternative to our real wood styles. This is a great way to change up your shifter without spen...
View full detailsThis slender stainless steel strip fits over the rubber gasket around the rear sleeper window of your Peterbilt. It's a simple but eye-catching tri...
View full detailsThese 1-1/2" diameter gauge emblems are tape mount. They feature the engraved Rockwood signature diamond. Manufactured in the USA.
Measures 9-7/8" wide (at the top, widest point) by 7-3/8" tall, with 7" between mounting holes, measured center to center. At the narrowest point, ...
View full detailsSold SINGLE. Dual function - works as both a marker and a turn signal. Hard-wired with three plain wires. These lights function at 12 volts.Each fa...
View full detailsFits 1" x 2.5" rectangular marker lights. Lights ground to the base, and the base has one hot wire to be hooked into your harness or spliced in.
The back of this light is chrome. Measures 4-1/4" diameter x 2" deep. This light is hard-wired with three plain wires. These lights function at 12 ...
View full detailsThis plain wiper knob is a great match for our air conditioner knobs, shown as related items. Sold SINGLE.
Chrome steel gauge bezels are less common, but they have a tendency to fit more tightly than chrome plastic covers. Sold SINGLE. Fits Kenworth W900...
View full detailsTurn signal light not included. Light must be removed to install this piece. Product fits behind light, not just around it. Sold in PAIRS.
Whether you have stock or chrome vents, this additional dose of shine works wonders on your dash. This piece simply tape-mounts to your dash in sec...
View full detailsOur best-selling Red 2" round LED light! We keep thousands of these in stock to keep up with demand. This is a massively dependable light, and an a...
View full detailsIncludes ring.
There are three wires, all attached to a .180 male bullet plug. The ground wire operates both the primary and secondary functions. Includes mountin...
View full details