Best Sellers

These reflectors make a great addition to our hubcap spinners (not included), but there are countless other ways to use them. Each reflector is sel...

Compatible with 1" diameter bumper guides. Will not fit 3/4" diameter styles, such as Bores brand. The plastic lens is replaceable - it screws in a...

1" wide. Includes all stainless steel mounting hardware.

This is Panelite's classic M3 marker light - a staple of air cleaner light panels! The chrome plastic bezel hides the mounting screws, for a smooth...

These round accents fit around the turn signal indicators for older style Kenworth "A" model and Peterbilt 359 dashes. Each measures about 1" diame...

Includes two stainless steel push-in tow pin hole covers. No assembly required.

New chrome vents are always a must-have, for any truck. Even if your stock vents are still in proper working condition, it's time to change them out!

This is one of our all-time bestsellers for the International interior. The opening measures 7" x 1-7/8", and is 1-1/2" deep. The mounting plate me...

Small toggle switch extenders like these are mostly used behind a toggle switch bezel, although they look great on their own.9/16" inner diameter, ...

This trim panel fits below the glove box, just above the floor. The sleek stainless helps to give your interior an air of sophistication, as well a...

These switch guards look great and protect your switches from accidental deployment. The engraved block lettering matches Woody's other accents for...

With an assist from a flathead screwdriver, it's relatively simple to snap your old vent out. Then, push this one back into its place for instant b...

No classic Peterbilt dash is complete without shiny new air conditioner vents. Simply use a flathead screwdriver to pop your old ones out, then rep...

This universal post measures 6" long. During installation, it mounts to your truck's frame. Then, the fender mounting arm slides over and is secure...

Sold SINGLE. Pedestal lights or antennas not included. Fits Freightliner Cascadia trucks 2018 - 2021. Will not fit 2017 and older models.

These push-in style bulbs are commonly found in dash gauges, bumper guides, and other areas of the truck. The 360-degree viewing angle makes this b...

Our "Fleet" series has quickly taken over as the best-selling oval LED style. Company drivers and owner/operators both love it because it's inexpen...

These window surrounds are a trim for the windows facing the front of the truck, above the sunvisor. Fits all year model W900B, W900L, and T660 tru...

Makes grabbing your air conditioner and heater knob that much easier, not to mention makes them look a lot better too! Sold SINGLE. See related ite...

This 18" x 18" oversize load flag comes pre-mounted to a 3/4" diameter wooden dowel. The dowel is 36" (3 feet) long.This is a simple, cheap solutio...

This trim runs along the bottom of the center fuse panel. It bends in the center at almost a 90-degree angle.

This short mudflap weight fits on various truck fenders, pickups, and trailers. Always check your measurements before ordering!No backs included. I...

These stainless rock guards mount flat against the fender of your 388 or 389, sloping back behind the headlight for optimum protection.Includes sta...

This replacement mirror is heated, only. It is not lighted or motorized. Sold SINGLE.

Other than the obvious benefit of saving you from fighting those teeny tiny screws, these screwless grommet covers also lay more flat against the t...

This simple chrome surround gives your mirror control panel a much needed dose of sparkle. Fits Kenworth T660 and W900 trucks 2006 and newer. Sold ...

This panel is on the lower left hand side of your steering wheel. Mounts using existing dash screws - no new hardware included. Also fits Coronado....

Fits only the lights shown as related items. No hardware required - this bezel simply snaps over your light. For extra hold, use a few dabs of sili...

Note: There are two different versions of the Freightliner Century/Columbia switch. One style has switches on the right side, the other has them on...

Measures 1.5" wide by 2" tall by 5.5" long. SINGLE.

Fits Peterbilt 379 and Kenworth W900 trucks through 2005 only. Will not fit 2006 and newer model trucks. Sold SINGLE.Prior to ordering, double-chec...

This replacement socket comes with several feet of wire attached, so you can quickly repair a damaged bumper guide and get back on the road. Bulb n...

1.5" diameter by 2.75" tall. Sold SINGLE. This is a push on style lugnut cover.

Compatible with 1" diameter bumper guides. Will not fit 3/4" diameter styles, such as Bores brand. Includes chrome plastic base. Sold in PAIRS. No ...

1.5" diameter. Sold SINGLE.

Includes chrome mounting hardware - flat washers and nuts. Measures 12" wide by 6" tall.

Fits trucks with 33mm diameter lugnut covers. One kit covers one wheel. Includes hubcap/beauty ring piece, 10 lug nut covers, and one hex-shaped lu...

Fits 4, 5, and 6 uneven notch hubs. Will not fit 6 even notch hubs. Includes adjustable mounting clips and has a center hole cutout for hubdometer ...

This trim fits above the glove box on Peterbilt 379, 386, 388, and 389 models 2006 and newer. Includes center hole for logo. Tape mount. Chrome ven...

This replacement overhead dome/map light lens measures 1-9/16" diameter. Fits Peterbilt 379, 386, 388, and 389 trucks 2006 and newer. Sold SINGLE.

Includes 4 chrome Phillips-head mounting screws.

Fits Peterbilt 2001 thru 2005 dashes.

Fits Peterbilt 359 and Peterbilt 379 2001 thru 2005 model dashes

This light has a solid, die cast chrome housing. The post acts as the ground, and it has two plain wires, so it can be set up as a dual-function (m...

Features: This light is a flush mount style light. Mounting hardware not included. This light is hard-wired with two male-end plugs (one positive,...

The distinctive Double JJ curve seen on these headlight brackets is recognized by truckers worldwide. Imitators have tried, but no one can quite ma...