Best Sellers

Includes center cover plate.

This chrome replacement ignition switch nut is a must-have. While it's a relatively simple addition, it really packs a wallop!

Tape mount. This stainless steel kick panel fits under the door, all the way down to the bottom of the cab. The dimples fit over the existing rivet...

Each pack includes three switch trims.

This large panel fits under the a/c control, ashtray, and lighter area in the center of your dash. It's fantastic for adding lots of shine quickly....

Cable Tie Mounts have an adhesive backing - simply peel off backing paper and apply. In addition to and/or in place of the adhesive backing a #6 sc...

Sold SINGLE. Pedestal lights or antennas not included. Fits Freightliner Cascadia trucks 2018 - 2021. Will not fit 2017 and older models.

Fits all truck models - Peterbilt, Kenworth, Freightliner, International, Western Star, etc. Air lines and connectors not included. Works with 1/2"...

Measures 16" wide by 14" long. The sturdy poly-rubber blend material makes this mudflap extra-resistant to curling. Sold SINGLE. Logos not included...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

The unique "Mirage" series turn signals feature a ring of LED light around the outer edge, with a center "tunnel" visual effect that makes the ligh...

These chrome steel bottom plates are a perfect addition to any mudflap. It's a great way to add a logo, without i nvesting in the expensive Kenwort...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

Fits both Freightliner Cascadia and Peterbilt 387 trucks. This chrome antenna cover will add a little glamour to an otherwise boring area of the tr...

Bold and unique headlight design. Patent number D866,822. Dual color LED position light bar changes from white to amber when turn signal activate...

This chrome window crank mounting screw is compatible with the window crank components shown as related items. Sold SINGLE. Replaces the window cra...

This replacement visor light plugs into the OEM wiring harness on Kenworth T680 and Peterbilt 579 trucks. Also fits Kenworth T880 and T770. Mountin...

Keep the inside of your stacks dry with these great stainless steel rain caps. Functional and stylish to boot. This hinged rain cap fits on flat-cu...

This ultra-soft truck wash brush is even softer than our yellow version. The wide-angled face means you can reach anything! Plus, the extremely sof...

These classic, simple fender guards would be equally at home on a working truck or a first-in-class show truck. Their unfettered elegance makes the...

These economy-style stainless steel hangers will keep you rolling without forcing you to spend all of your fun money! These are great for winter, w...

Compatible with 1" diameter bumper guides. Will not fit 3/4" diameter styles, such as Bores brand. Includes chrome plastic base. Sold in PAIRS. No ...

Measures 6" longer than standard anti-sail panels, for a total length of 20". Measures 11" wide. Will not fit angled mudflap hangers. Sold in PAIRS.

This speaker cover fits some Peterbilt 2006 and newer models. It's not just prettier than your stock speaker cover, it's easier to keep clean as we...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

Includes female 1/2" x 13 adapter. Compatible with a 1/2" x 13" male post. Requires the use of a shifter base with a threaded stud. Click here for ...

Includes female 1/2" x 13 adapter. Compatible with a 1/2" x 13" male post. Requires the use of a shifter base with a threaded stud. Click here for ...

Sold EACH. Connects to the existing OEM plug (not included). Includes mounting screws. All lights have amber diodes. Fits Peterbilt 579 trucks 2014...

Measures 24" wide by 30" tall. Whether you're looking to match your paint or find something to add contrast, these bright plastic mudflaps are a gr...

This is a great side turn signal. The bulbous shape ensures that it will stick out far enough to catch the eye of anyone silly enough to hang out i...

Please note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

The hook can be flipped inside the housing for alternate use as a plug, or to keep it from catching on anything (or anyone!) that passes by. Sold S...

No mounting hardware included. Compatible with standard North American license plates.

This light has a built-in 3 prong female plug on the back. This is a surface mount light - not a grommet mount.

Compatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...

This is a clear plastic replacement lens for incandescent Kenworth-style (also known as Grakon 5000) rectangular cab lights. Sold SINGLE. Mounting ...

Manufactured in the USA. Check your measurements prior to ordering!! See related items for other sizes.Inner measurements: 5-3/4" x 3-3/8" Outer me...

Includes driver's and passenger's side door window trims. The passenger's side chopped look panel has a cutout for the upper door mirror. Both side...

This panel fits around the ignition key switch and three switches to its right. Tape mount, manufactured in the USA!

Fits International trucks. Unlike most of our small nut covers, these are completely round and smooth on the inside. 1-7/8" tall.

For easy installation, these "Chopped Look" ventshades are pre-cut to fit around the mirror bracket, rather than forcing you to remove the mirror a...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

Fits T660, T800, and W900 models 2006 and newer. Sold SINGLE.

Sold individually. Side turn signals sold separately. Includes amber (clear lens) 14 diode LED lower dual function marker/turn signal light and mou...

Sold SINGLE. This light replaces the stock visor marker light on many Freightliner trucks, including Century and Columbia models. May require new w...

This light replaces the bulb and lens on your Peterbilt dual rectangular headlight assembly. Simply wire it into your harness and use your existing...