Best Sellers

Sold SINGLE. 

Fits Kenworth dashes prior to 2005. Each switch guard includes an engraved stainless steel back plate, switch guard, and chrome face nut. Manufactu...

Sold SINGLE. Watermelon lights not included. Compatible with or without Roadworks ICON series pocket adapters. This is a plate that mounts behind t...

Thanks to decades of work, the pink ribbon has become universally recognized as a symbol of the fight against breast cancer. This 100% preshrunk ul...

These push-in style bulbs are commonly found in dash gauges, bumper guides, and other areas of the truck. The 360-degree viewing angle makes this b...

Fits Peterbilt 379, 386, 388, and 389 trucks 2006 and newer. Will not fit 2005 and older trucks with toggle switches.

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

This is one half Delphi plug - the female end, attached to about 4" of plain wire ends. It has a clip and the rubber seal around the base of the pl...

These HOT new headlight assemblies mimic the look of Lexus luxury vehicles, with a two-in-one LED light bar below the headlights. This extremely co...

Measures 3" x 2", with 1-3/4" between mounting holes (measured center-to-center). Hardwired with two male .180 bullet plugs, connected to the back ...

Right side only. Left side piece is sold separately. Installation tip: Some customers find it easier to remove the clips from the back of this piec...

This chrome bezel is manufactured in the U.S.A. Features a simple diamond and swirl decorative motif.

Fits Peterbilt 379 and Kenworth W900 trucks through 2005. Will not fit 2006 and newer trucks. Crank only - chrome base kit sold separately. Prio...

We recommend these anti-sail brackets for 24" x 24" or 24" x 30" mudflaps. Because this style is made from stainless steel, rather than chrome stee...

This item mounts using double-stick tape and a screw. Make sure to clean off the surface of the hood latch prior to installation. We recommend rubb...

This heavy-duty light mounting flange works best with Maxxima brand lights. It may fit other brands, but some will be too large or too small to fit...

With an assist from a flathead screwdriver, it's relatively simple to snap your old vent out. Then, push this one back into its place for instant b...

Sold SINGLE.

The thin profile of these Century gauge bezels sets them apart from others, giving it a futuristic feel. The extra-long visor is also unique to thi...

Sold in PAIRS. These tape mount switch covers feature two large holes at the top and bottom, as well as a single smaller indicator light hole in th...

Installs using included 3M double-stick tape. Fits around door lock and power window buttons on the passenger's side door panel. For driver's side,...

Note: all colors have been photographed to the best of our ability to reflect the way that each color looks in person. However, due to variances in...

This polished stainless trim fits the six gauges to the right of the steering wheel, above the radio controls. Tape mount. Manufactured in the USA!

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

Replaces the stock visor light in Freightliner Century, Columbia, and other model trucks. Note: You may have to change the stock wiring! This light...

Measures about 7-1/2" long by 1" wide. This chrome plastic bezel snaps onto your dash, providing just the right amount of shine. Sold SINGLE.

These flat "chopped look" door trims give you all the perks of a classic ventshade, but they do it while looking a lot more show-worthy.Tape and ri...

This boot brush, aka "boot caddie," can be attached to your step using cable ties or the included mounting bolts. See related items for other color...

Fits trucks 2006 and newer. This adhesive mount door handle trim really improves the aesthetics of your Kenworth. Grand General's peel-and-stick wo...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

The lightweight, but very sturdy poly-rubber blend material is especially great for these fender flaps, as it helps them stand up without curling. ...

Fits Peterbilt 379, 386, 388, 389, and other models 2006 and newer. Will not fit 2005 and older trucks. This piece is the chrome surround only. Rep...

Never waste time installing grommet covers ever again! This bezel twists on over your grommets without screws for a snug fit and smooth look. No ex...

Each tape-mount cover has a cutout for the switch label and light. Fits Peterbilt 379, 386, 388, and 389 trucks 2006 through 2021.

This chrome plastic small control knob with jewel is crafted from quality injected molded plastic, with a triple chrome plated finish for maximum d...

This light is a fresh take on the timeless 12 diode Peterbilt-style marker light. It has a reflectorized backing, which adds just the perfect amoun...

Sold SINGLE. Measures 2-1/4" long by 3/8" inner diameter.

Heat Shrink Terminals have been adhesive-lined to seal the connection. The translucent tubing allows for visual inspection. Terminals provide maxim...

Sold as SINGLES. Light not included. Compatible with any watermelon-style LED or incandescent light.

Sold in PAIRS. These are 1156 single-function LED bulbs.

This is our all-time bestselling replacement windfin light. The bubble shape ensures that it can be seen from all angles, which really sets it apar...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

As the name implies, these Fleet lights are economically priced, but high-quality - perfect for outfitting a large number of trucks without bankrup...

Fits Peterbilt 579 and various other 2010 and newer models. Sold SINGLE.

This stud is a replacement for the quick mount stud that comes with our quick mount safety flag installation kits. If you loose a stud or want to a...

Made from durable, lightweight poly-rubber blend in the USA.

Fits Peterbilt truck models 379, 386, 388, and 389 year 2006 and newer. Replaces the stock diagnostic port cover.

Also fits Peterbilt 330, 335, 377, 378, 386, and 388 model trucks - doors with no vent window only! Will not fit trucks with a vent window, or the ...