Best Sellers

This light is RED when on.These lights function at 12 volts.Converting all your incandescent lights to LED? You may want to read about LED flashers...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardw...

Interested in the classic look of a Panelite M1 LED marker light, but discouraged by the price? This economy style will give you all of the same gr...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

The amber turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the am...

Requires a cab light housing or special bracket for installation. Will not flush mount on its own. This is a dual-function (marker and turn signal)...

This is not a grommet mount light. It is a surface mount light, perfect for applications like replacing the load lights in the back of your sleeper...

This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items.This light has a built-in two-prong m...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires. See rel...

The newest millennium-style light features a reflectorized lens and a curvy, futuristic chrome bezel. Four diodes shine brightly through a slightly...

Looking for an extra-bright light bar that's perfect for any truck? This one is a big-time favorite in our store. We've seen customers use these ju...

This sweet little light is economical without being simple. The reflectorized background looks great when the light is off, and amplifies the diode...

This thick, rubber/foam mounting gasket is a must-have to ensure proper fit and to protect your light from water and corrosion. It evens out the cu...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not inclu...

Using this mounting base, you can use any of our Grakon-1000 style LED lights anywhere on your truck - or even on a car or pickup! Light NOT includ...

Features: Measures 6-1/2" x 2" x 3/4" with 4-1/2" mounting hole centers. Please note: This light does not have ribs as shown in the dimension ...

This is a flush mount light which requires the use of a mounting rim, such as the ones shown as a related item. This light has a built-in two-prong...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a flush mount base, allowin...

This great replacement light takes all the irritating maintenance out of your cab lights. Instead of fighting with burned-out bulbs and melted or b...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires.

The M1 Generation series has all of the great features of a Panelite M1, but for a much lower price! These lights will never go out of style. They'...

This chrome plastic bezel fits over any 2 inch by 6 inch trailer style rectangular LED light. This is the first time we've had a bezel with a visor...

This light works excellently as a license plate/tag light, or as an extra marker light anywhere on the truck. Chrome mounting bracket not included.

This is Panelite's classic M3 marker light - a staple of air cleaner light panels! The chrome plastic bezel hides the mounting screws, for a smooth...

These LED replacement lights for the torpedo-style cab light housing are one of our most popular items. Drivers have been waiting a long time for a...

Includes dual function (marker and turn signal) LED light and stainless steel mounting bezel. Sold SINGLE. Light measures approximately 3-5/16" dia...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This bezel fits original Grakon 1000 housings, as well as our replica housings. Includes mounting screws. Lights and housings sold separately. The ...

Electrical Built-in 2 prong female plug 12 volt Single function Design 12 Amber diodes - 2 rows of 6 6-1/4" (H) x 2-1/4" (W) x 1/4" (D) Includes...

This Panelite marker light is longer than the M3 style, but narrower than the M1. It's a nice in-between style with 3 single-function diodes.Featur...

This light is very popular! It's a great option for drivers looking to put light under their truck, or along a narrow area.This light is hardwired ...

Replacement bezel, only. Lights not included. This bezel is compatible with Panelite M3 LED or incandescent lights.

This kit includes the Grakon 1000 housing, a foam or rubber mounting gasket, mounting bolts, LED light, and chrome visor. Whether you're starting f...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

The Infinity series has been around for awhile, long enough to gain a lot of fans. We've seen this small version of the light used on a whole range...

This sequential style differs from our SKU #12372 in that the light bar flashes from left to right (driver's side) or right to left (passenger's si...

This thin white light makes a great accent on trucks, motorcycles, even hot rods. Pair it with one of our chrome housings, shown as a related item,...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This kit includes a single-function LED light, chrome plastic housing, and visor. This housing is an aftermarket style that replaces an existing Gr...

These LED replacement lights for the torpedo-style cab light housing are one of our most popular items. Drivers have been waiting a long time for a...

Includes chrome bezel. Sold SINGLE. This is a single function light, hardwired with two plain wires.Measures 6-5/8" by 2-1/4", with 4" between moun...

Features: This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items. This light has...

The amber turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the am...