Best Sellers

These classic, simple lugnut covers are a driver favorite. They have just enough chrome to make your wheels look sparkly without stepping into gaud...

This is the most common hubcap. It fits almost any truck - Peterbilt, Freightliner, Kenworth, International, etc. Simply line the two small notches...

These spikes are the hottest trend on the road right now. For an average of under $9 per wheel, you can make your ride the most menacing truck or c...

This open-backed grommet is compatible with any of our 4" round LED or incandescent lights. For more expensive styles, you may want to use a stainl...

Each switch plate is manufactured in the U.S.A. and features engraving. Some switch plates are engraved with the signature Rockwood diamond.

This single three-prong pigtail is great for adding a single light quickly. If you are adding several lights in one area, we suggest our continuous...

Our rubber mounting grommets are thick and sturdy, sure to last you for several years. There's nothing flimsy about them! You don't want your LED m...

Threaded - there must be at least 1/2" of stud threads sticking up from the nut in order for these to fit. Measures 4-1/4" tall. Sold SINGLE. See r...

These chrome steel 8" diameter drive axle hubcaps are the most common size found on the road. They fit most Peterbilt, Kenworth, and Freightliner t...

This nut cover has it all - style and dependability! The threaded insert holds the chrome cover onto the lug. It's extra wide to hide the flange wi...

Sold SINGLE. Includes stainless steel ring used for mounting this as a flush mount light. The #1156 version of this light has 1 wire and is self gr...

This flat, top-hat style bolt cover is a classic. It looks great anywhere on the truck, and blends in perfectly with other styles. Not sure what s...

4-7/8" tall. At least three threads must be sticking up out of the nut for these covers to catch. The ferocious spike is a sure signal to other dri...

Knobs not included. Sold SINGLE.

Knobs not included. For the matching "Trailer" plate, see Related Products

Sold SINGLE. Includes stainless steel ring used for mounting this as a flush mount light. This is a 3-wire light - functions as a marker and a turn...

This shift knob base is a compatible component for knobs listed as related items, ONLY. It is not meant to be used without a top piece. Fits Eaton ...

Imported. Includes chrome mounting hardware - nuts and flat washers. Sold SINGLE.

Our chrome axle cover kits are one of our best-sellers of all time. It's now affordable to outfit a fleet in beautiful, high-quality axle covers. K...

Never waste time installing grommet covers ever again! This bezel twists on over your grommets without screws for a snug fit and smooth look. No ex...

These are genuine original Panelite LED lights! Thanks to overwhelming demand, Optronics has resumed production of this extremely popular light wit...

Includes chrome mounting hardware - carriage head bolts, flat washers, and nuts.

The actuator covers are translucent, thus allowing the light emitted by your rocker switches to shine through. The covers do not include any additi...

Imported. Each switch plate has a unique design, including engraved script label, position indicators, or a small image.

Fits horizontal air switches on Peterbilt 365, 367, 379, 384, 386, 388, 389 trucks 2001 to present. Tape mount. Each style is engraved with a small...

1/8" diameter is common older trucks. Most newer trucks will have 5/32" diameter air lines.

Measures 5" tall. Requires 1/2" of bolt threads sticking out of the nut in order to catch and hold. Sold SINGLE.

Fits Peterbilt 379, 386, 388, 389 and others. Fits Kenworth T660 and W900.

Fits Freightliner Century, Columbia, Coronado, Kenworth W900 2002-2005, Peterbilt 379/386/389 2006+ rocker switches. Will not fit Kenworth T2000, P...

Marble knobs are each unique and may vary quite a bit from the image shown. We cannot control the pattern or color ratio. Includes female 1/2" x 13...

Our best-selling light of all time - over 50,000 have been sold since 2003! This is an extremely dependable light. In ten years, we have had less t...

This lugnut cover is a customer favorite for a number of reasons. It's our cheapest lugnut cover, for one, which means you can afford to pick up al...

This female-to-female adapter features standard thread. 1/2" diameter, 1-11/16" long.

Full set of 6 axle covers includes 2 steers (front) and 4 drives (rear) and all 60 threaded 33mm cylinder lugnut covers. All components listed here...

Fits Peterbilt 379, Kenworth W900, Freightliner Classic. Headlight not included.

While our continuous wiring harnesses (see related items) are usually ideal, there are occasions where you only need a single plug - perhaps you've...

This light is a stop/turn/tail and a backup light, all in one housing! Using the standard three-prong offset plug, it will light up red and functio...

Each switch guard is comprised of a chrome plastic switch guard with an engraved stainless steel nameplate. Use these to protect your switches agai...

This grommet works with any 6" x 2" (standard-size) oval light, incandescent or LED. Cover with one of our chrome bezels for a polished look! For m...

This push-on style nut cover measures 33mm diameter by 3-1/8" tall. Slight dimple on top.

This pointed style hubcap has just enough edge to set you apart from the pack. Pair with some of our spike lugnut covers for a really rebellious lo...

This continuous wire harness uses 2 prong plugs and has 6" of wirebetween each plug. Approximately 3" of wire will be left on each openend. This ha...

Fits all 2006 and newer model Peterbilt 379, 386, 388, and 389 trucks, as well as all 2006 and newer model Kenworth W900, T660, and T800 trucks. T...

This continuous wire harness uses 3 prong plugs and has approximately 12" of wire from center to center of neighboring plugs. Approximately 6" of w...

The M1 Generation series has all of the great features of a Panelite M1, but for a much lower price! These lights will never go out of style. They'...

These easy-to-install lights create a beautiful glow inside your air cleaner cans. Simply stick them inside the top of the can, hook them up to pow...

Our chrome hub cover kits are one of our best-sellers of all time. While you'd pay over $200 from other companies for a full set of axle covers, ou...

This flat plate is great for IFTA, OOIDA, and other permits or inspection stickers. Instead of worrying that you'll damage your paint by scraping o...