Best Sellers

These 17" long fluorescent bulbs are commonly found in the sleepers of many trucks, including Peterbilt, Kenworth, Freightliner, and International....

Compatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...

Sold SINGLE. Dual function - works as both a marker and a turn signal. Hard-wired with three plain wires. These lights function at 12 volts.Each fa...

The red turn signal is a dual-function light. There are three wires, all attached to .180 male bullet plugs.  Includes mounting ring. Sold SINGLE.

The first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...

6 Colors in 1 Light OE Replacement #P54-1194-100 Color Changing Switch with Memory Recall Color Changing Function with Memory Recall For Kenworth ...

The last big trend in LED lighting was the emergence of clear lens lights. Now, we're moving right along to the next style - reflectors.This futuri...

This light has a built-in 3 prong female plug on the back. This is a surface mount light - not a grommet mount.

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

This single-function cab light is a replica of the Grakon 1000 style found on most newer Petes, with some modern updates - an LED light, for one!In...

6 Colors in 1 Light OE Replacement #16-07401 Color Changing Switch with Memory Recall LED Projector Map Light for Reading For Peterbilt Models Eas...

Includes mounting hardware. Sold SINGLE.

This is a fantastic light for multiple applications - rear utility lights in the sleeper, mudflap hanger lights, and more. It is hard wired with fo...

The Dual Revolution series are truly, well, revolutionary! For the first time, you can have a DOT legal light in the same housing as a color that's...

Perfect for a license plate light or interior accent. Installs using a chrome bracket, such as those shown as related items.

Features: This light is a flush mount style light. Mounting hardware not included. This light is hard-wired with two male-end plugs (one positive,...

Fits 1" x 2.5" rectangular marker lights. Lights ground to the base, and the base has one hot wire to be hooked into your harness or spliced in.

The first color listed for these lights is the "primary" color. The white wire is ground and the black wire will be "low" power to the primary colo...

This light has a built in two-prong female plug in the back. There is also an additional .180 bullet-style male plug, attached by a few inches of w...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

The reflectorized face of this light makes it very popular with our customers. Who doesn't love extra sparkle?This dual function (marker and turn s...

This light has a built-in 2 prong female plug in the back. See related items for compatible male plugs and harnesses. Also available with male .180...

There are three wires, all attached to a .180 male bullet plug. The ground wire operates both the primary and secondary functions. Includes mountin...

This light is a stop/turn/tail and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up red and fun...

This chrome plastic bezel is compatible with any M3 or P3 style light, but it is an exact replacement for the ribbed bezel found on the Magnum P3 l...

This light is a single function, only. Requires a 3/4" diameter hole for mounting. Includes rubber grommet and chrome bezel. 2 plain wires. Sold SI...

This light is RED when on.These lights function at 12 volts.Converting all your incandescent lights to LED? You may want to read about LED flashers...

This light requires the use of either a rubber grommet or mounting flange. This light has a built-in two-prong female plug in the back.

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardw...

This light is a stop/turn/tail and a backup / reverse light, all in one housing! Using the standard three-prong offset plug, it will light up red a...

This is the THREE wire version of this light. See related items for the four wire style. These lights are wired with the standard two male bullet s...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

This set of two mudflap hangers includes six "Fleet" Red 4" round 18 diode LED stop/turn/tail lights - CLEAR lens, with chrome twist-lock mounting ...

Not only is this setup a great deal, it's also a major time saver. The lights, grommets, bezels, and wiring are all pre-installed, which saves you ...

Interested in the classic look of a Panelite M1 LED marker light, but discouraged by the price? This economy style will give you all of the same gr...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

The amber turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the am...

Requires a cab light housing or special bracket for installation. Will not flush mount on its own. This is a dual-function (marker and turn signal)...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

This is not a grommet mount light. It is a surface mount light, perfect for applications like replacing the load lights in the back of your sleeper...

This chrome plastic bezel also has a visor. Features a 14 diode LED turn signal. This sequential style differs from our SKU #12725 (shown as a rela...

This is a flush mount light which requires the use of a mounting rim, such as the ones shown as related items.This light has a built-in two-prong m...

These small push-in bulbs are a fine temporary fix for your gauges or other small spaces.For long term changes, we suggest a 194 LED bulb. These in...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires. See rel...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...