Best Sellers

Includes incandescent bulbs and hot wire. The lights ground to the base. Sold in PAIRS. Compatible with 1" diameter bumper guides. Will not fit 3/4...

These arrow-style lights make great turn signals. Each section lights up sequentially, adding one row, two rows, three rows, four, and then the ent...

While most lights only have diodes pointing straight out, these have a unique feature that most millennium-style lights cannot boast - diodes that ...

This extra-large light measures 7-7/8" long by 3-11/16" tall by 1-1/8" deep. It is a dual function light, meaning it can be used as both a marker a...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

Flush mount style light. Mounting hardware not included. Hard-wired with two male-end plugs (one positive, one negative), connected to the back of...

This single-post mount fender turn signal features a side reflector and flashy chrome rim. Sold SINGLE.This light is post-grounded with two wires -...

This standard-sized, 6" x 2" oval light fits in any standard oval mounting grommet. Powered by a single incandescent bulb.

This is a dual function light - works as both a marker and a turn signal. The chrome bezel hides the mounting screws (included). Hardwired with 3 w...

This watermelon lens style light has a 3" diameter across the face, a 2-1/8" mounting arm, and an overall height of 5-3/4". Single-function. Hardwi...

This grommet-mount light is anything but standard. The glowing outer ring gives you the strength and endurance of an LED light, with a brand-new ty...

This light bar is durable enough to withstand all kinds of exterior applications - we've seen it mounted on bumpers, down windfins, and hidden behi...

Measures 6" x 2". Flush mount. Dual function - works as both a marker and a turn signal. Has a three prong offset female plug in the back. Male plu...

This flashing strobe unit has 4 user-selectable patterns, which can be changed using the yellow wire. Mounts easily to our beacon brackets or mirro...

9 diodes. Crush proof, 4 different functions. Battery powered - requires 3 AAA batteries (not included).

This light is too nice to be considered average, but not too fancy to be unobtainable! It strikes an excellent balance.Features: This light has a ...

These oval strobes are perfect for an oversize trailer. Instead of trying to awkwardly mount a strobe bar where it can be seen, stick a couple ligh...

Includes mounting brackets. 1" diameter poles. Measures 4' total - 1' up to the bend, 3' after the bend. NOTE: we recommend using some clear silic...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

American Superlite makes a simple, no-nonsense marker light that's perfect for any application. Their famous lens design ensures that your lights w...

Sold SINGLE. This is a single function light, hardwired with two wires. The included 1157 LED bulb can be replaced.

Measures 6.1" overall height by 4.2" wide. This light functions as both a marker and a turn signal, and is hardwired with three plain wires. It fea...

Sold SINGLE. Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height.

Compatible with 1" diameter bumper guides. Will not fit 3/4" diameter styles, such as Bores brand. Measures approximately 5-1/4" overall height, in...

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

These lights are great for mounting to mirror arms, on the ends of your bumper, or anywhere else with space for the simple, single mounting bolt.Th...

This design features center diodes on top and on the face, plus an outer "Halo" glowing ring. Single function only. Housing not included. These lig...

This light has 6 center diodes and an extraordinary LED-powered glowing outer ring. Sold SINGLE. Features a built-in offset 3-prong female plug.Not...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. Amber on one side, Red on the other side. Sold SINGLE. See...

3 functions - steady, flash, and split flash. Magnetic mount. Requires 4AA batteries/not included. These lights function at 12 volts.

Measures 7.75" overall width, 5" overall height. Lights are 3.5" diameter, cab light-style lights. Sold SINGLE. This is a heavy light, so we recomm...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

These lights, which are specifically designed to fit on the top rail of your trailer, feature a wide-angle diode pattern for maximum visibility.Fea...

This light works as a turn signal and a marker light, and is hard-wired with three plain wires. These lights function at 12 volts.

This light is AMBER on both sides! Although in most states in the US it is required for pedestal lights such as this to have an amber face to the f...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This roof light is something of a hybrid - it has both the rectangular shape of a Kenworth-style light, and just a hint of the round torpedo shape....

This slender clearance light is curved and ribbed on top, making the 7 diodes inside look like one long, solid line of light. The small shape lends...

The Phantom I series is a neat little light - powered by a double bubble/tiger eye style base, but covered with a Millennium-style chrome bezel to ...

Bolt mount. Also available in a similar magnet mount style. Manufactured in the USA. Measures 5.5" diameter, 4.5" tall.

The timeless Panelite M1 has now been updated, with a new look that will delight drivers for years to come! The smooth Halo Glow utilizes LED diode...

Measures 6" L x 2" W x 1-5/8" H. This light is a flush mount style light. Mounting hardware not included. These lights function at 12 volts.

This is a dual-function light - both faces work as a marker and a turn signal. Hardwired with three plain wires. White is ground, black is hot (mar...

This dual-function light has all of the perks you'd expect from Maxxima - bright diodes, reliable quality, plus a major bonus - it will function in...

These incandescent lights are a cheap alternative to LEDs, if you're in a pinch. They're not as reliable, with a tendency to burn out completely an...

This light is hard-wired with two plain wires.