Products

This is a dual function (marker and turn signal) LED light, with one amber face and one red face. Measures 3" diameter across the face, 1-1/4" deep...

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 4-5/8" deep. Mounting stud is 1-5/8" long. 18 diodes p...

This is a dual-function light. It will work as both a marker and a turn signal. 3" diameter, 4-5/8" deep. Mounting stud is 1-5/8" long. 18 diodes p...

This replacement load light is a great way to update the back of your sleeper. You'll increase your visibility, too. Most stock utility lights in t...

This replacement load light is a great way to update the back of your sleeper. You'll increase your visibility, too. Most stock utility lights in t...

Measures 4-1/4" diameter x 2-1/2" deep. This light is hard-wired with three plain wires. Mounts using single mounting stud bolt. These lights func...

This dual-face pedestal light (also known in some circles as a lollipop light) is perfect for use on the bumper, mirrors, windfin, steps, or anywhe...

As the name implies, these Pearl LEDs have a smooth surface and radiate simple beauty. These are some of our all-time favorite fender turn signals,...

Like the name says, this is a truly low-profile light - measuring just 1/2" deep! Perfect for air cleaner brackets, bumpers, sunvisors, and more. ...

Like the name says, this is a truly low-profile light - measuring just 1/2" deep! Perfect for air cleaner brackets, bumpers, sunvisors, and more. ...

Red LED turn signal on one side, solid chrome back on the other side. Measures 4-1/4" diameter x 2-1/2" deep. This light is hard-wired with three p...

Grand General's Pearl LED line is characterized by smooth, slick lines and low profiles. The red ovals are great for mudflap hangers, rear bumpers,...

Grand General's Pearl LED line is characterized by smooth, slick lines and low profiles. The red ovals are great for mudflap hangers, rear bumpers,...

This is a dual-function, grommet mount light. Measures 5-5/16"(L) x 3-7/16(W) x 2-9/16"(T). This light requires the use of either a rubber grommet ...

This is a dual-function, grommet mount light. Measures 5-5/16"(L) x 3-7/16(W) x 2-9/16"(T). This light requires the use of either a rubber grommet ...

7 Colors in 1 Light  - White/Warm White/Amber/Blue/Green/Purple/Red OE Replacement Color Changing Switch with Memory Recall LED Projector Map Lig...

6 Colors in 1 Light OE Replacement #16-07401 Color Changing Switch with Memory Recall LED Projector Map Light for Reading For Peterbilt Models Eas...

Crisp & Clean USA Flag Logo Projection 6 Colors in 1 Light OE Replacement #16-09012 Color Changing Function with Memory Recall Red Steady-On t...

This style does not have a driver's side and passenger's side option.  Crisp & Clean USA Flag Logo Projection 6 Colors in 1 Light OE Replace...

7 Colors in 1 Light - White/Warm White/Amber/Blue/Green/Purple/Red OE Replacement Color Changing Switch with Memory Recall LED Projector Map Ligh...

Includes chrome bezel and rubber mounting grommet. This is a single-function light with two .180 male bullet plugs.

Includes chrome bezel and rubber mounting grommet. This is a single-function light with two .180 male bullet plugs.

Functions as a stop/turn/tail light, with 3 plain wire leads coming out of the back of the light. The decorative chrome bezel snaps on and hides th...

Mounts into a standard 4" rubber grommet (sold separately). Has a 3-prong offset female plug built into the back to power the RED stop / turn / tai...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

This is a dual function, three wire light. It will work as a marker and a turn signal. It has a threaded back. Includes chrome bezel and plastic nut.

This is a dual function, three wire light. It will work as a marker and a turn signal. It has a threaded back. Includes chrome bezel and plastic nut.

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

Mounts in a 3/4" diameter hole. This light has a threaded back and includes a plastic nut for installation. It is a single-function light, hardwire...

This light's overall measurements are approximately 1" by 1-1/4", including the chrome bezel. This is a dual function (marker and turn signal) ligh...

This slender clearance light is curved and ribbed on top, making the 7 diodes inside look like one long, solid line of light. The small shape lends...

This chrome-plated light is a much more durable option than our mirrored grommet cover. You won't have to worry about broken glass with these!Featu...

This is a single-function LED light - works as a marker only. Includes stainless steel bezel. Mounting hardware not included.

This is a single-function LED light - works as a marker only. Includes stainless steel bezel. Mounting hardware not included.

This light is hard-wired with two plain wires. These lights function at 12 volts.

You might be surprised by how much power is packed into this small package. There are lights twice this size that don't have 16 diodes, but our tig...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Includes dual function (marker and turn signal) LED light and stainless steel mounting bezel. Sold SINGLE. Light measures approximately 3-5/16" dia...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

These slender, flush mount lights are a great addition to any truck or even smaller vehicles. Their small size means they'll fit just about anywher...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires.

Depending on who you ask, beehive lights are relics, retro, or still just as cool as ever. We still see them from time to time, usually on air clea...