Products

1-11/16" from end to end x 7/16" tall. This type of bulb is commonly found in the dome lights of all sorts of trucks, including Peterbilt, Kenworth...

1-11/16" from end to end x 7/16" tall. This type of bulb is commonly found in the dome lights of all sorts of trucks, including Peterbilt, Kenworth...

Sold in PAIRS. These are 3156 single-function LED bulbs.

Sold SINGLE. These are 3157 dual-function LED bulbs.

Sold in PAIRS. These are 3157 dual-function LED bulbs.

These teeny tiny dash bulbs are the smallest we have. They're even smaller than a 194! Approximately 1/8" diameter. They're commonly found in small...

Each light functions and both a marker / clearance light and turn signal or auxiliary light. Mounts in a 3/4" diameter hole.

76290, 76291, 76292, 76293, 76294, 76295, 76296, 76297This LED light bar includes a short chrome mounting pedestal. These long, thin lights are per...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This long, thin strip light is perfect for interior or exterior use. It's lightweight and small enough to be mounted with double-stick tape inside ...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardw...

These push-in style bulbs are commonly found in dash gauges, bumper guides, and other areas of the truck. The 360-degree viewing angle makes this b...

9 diodes. Crush proof, 4 different functions. Battery powered - requires 3 AAA batteries (not included).

This small, 3 diode light is perfect for adding a subtle glow to your truck. Great for interior or exterior applications. Functions as a marker, on...

This bullseye/bullet rubber grommet is perfect for replacing only that single rubber piece instead of the entire light. It is 3/4" and fits most bu...

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is RED w...

This light features 8 different internal flash patterns - including steady. No external flasher mechanism is needed! Change patterns simply by touc...

Delivering style while facilitating visibility, these new LED side marker lights include 6 high power SMDs per direction. Not only do these lights ...

This is a 196" long red LED, adhesive-mounted flexible strip light. This heavy-duty, commercial-grade light is built for on-highway applications an...

This light has completely transparent lenses, with virtually no texture or ribbing. As a result, each individual diode shoots light out like a lase...

Features: 48 amber diodes, 40 red diodes. This light is hard-wired with three plain wires. These lights function at 12 volts. One face of this li...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This unique pedestal light has a nice, low profile - great for mounting on the ends of a bumper or perhaps on a tool box. Each light functions as b...

This unique pedestal light has a nice, low profile - great for mounting on the ends of a bumper or perhaps on a tool box. Each light functions as b...

This stud-mount LED turn signal is a modern favorite. The thousands of tiny reflectors boost the already-powerful diodes, giving you the bright, pi...

The reflectorized face of this light makes it very popular with our customers. Who doesn't love extra sparkle?This dual function (marker and turn s...

This turn signal is very versatile - it's as at home on your fenders, bumper, mirrors, or even tool boxes as it would be anywhere. This light is h...

This round 4" diameter turn signal, also known as a pedestal light or lollipop light, is perfect for your mirrors, tool boxes, steps, or bumper.Thi...

This light works as a turn signal and a marker light, and is hard-wired with three plain wires. These lights function at 12 volts.

This turn signal is lightweight enough to hang out on your bumper without breaking off, without sacrificing brightness. Each face has a 3" diameter...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This is a dual function light, hardwired with 3 plain wires. One face is red and the other face is amber. Can be used as both a marker and a turn s...

This is an extremely popular lollipop-style light. Each side has 17 diodes, but the multi-faceted background turns each point of light into dozens,...

This lollipop-style LED pedestal light can be fitted anywhere - bumpers, mirrors, wings, and more. Use it alone, or with help from one of our mount...

This lollipop-style LED pedestal light can be fitted anywhere - bumpers, mirrors, wings, and more. Use it alone, or with help from one of our mount...

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. Amber on one side, Red on the other side. Sold SINGLE. See...

Sold SINGLE. Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height.

Light measures 4" diameter, with a 1-1/2" mounting stud. 2" wide, 5-1/2" overall height. One face of this light is amber, and one face of this ligh...

There is no specific driver or passenger's side for this light - it has turn signal diodes on each side, and therefore can be used as either a driv...

Measures 6.1" overall height by 4.2" wide. This light functions as both a marker and a turn signal, and is hardwired with three plain wires. It fea...

One face of this 9" long pedestal light is Amber, and the other is Red. Both lights can be removed and replaced in case of breakage or diode burnou...

This turn signal is perfect for the end of a boxed-end bumper, or something a little more custom - on your street rod, perhaps? One side is Amber w...

This 19-diode pedestal or lollipop light is a perfect fit for fenders, bumpers, and windfins. One face is amber and the other face is red. Both sid...

Sold SINGLE. Hard-wired with three plain wires. These lights function at 12 volts.

Sold SINGLE. Hard-wired with three plain wires. These lights function at 12 volts.

Sold SINGLE. Dual function - works as both a marker and a turn signal. Hard-wired with three plain wires. These lights function at 12 volts.