Products

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

Sold SINGLE. This is a single function light, hardwired with two wires. The included 1157 LED bulb can be replaced.

Fits 1" x 2.5" rectangular marker lights. Lights ground to the base, and the base has one hot wire to be hooked into your harness or spliced in.

Sold SINGLE. The turn signal can be unscrewed and flipped to function for the opposite side. Replacement turn signals are available for purchase se...

This chrome plastic bezel also has a visor. Features a 14 diode LED turn signal. This sequential style differs from our SKU #12725 (shown as a rela...

Compatible with all brands, 1" by 4" LED or incandescent rectangular marker lights. Sold SINGLE. Light not included.Light snaps into and grounds to...

Fits Roadworks Bulls-Eye LED marker lights ONLY. Will not fit our mini button lights or other brands. This product is the bezel ONLY. Lights not in...

When these headlight bezels first arrived on the scene, they quickly spread like wildfire and became a huge hit! Drivers all over the country and a...

Sold individually. Includes amber (clear lens) 14 diode LED lower turn signal light and mounting screws for light. Existing headlight bezel bolts w...

Sold individually. Side turn signals sold separately. Includes amber 14 diode LED lower marker/clearance/turn signal light and mounting screws for ...

Sold individually. Side turn signals sold separately. Includes amber (clear lens) 14 diode LED lower dual function marker/turn signal light and mou...

Sold individually.Includes amber 14 diode LED lower dual-function (marker and turn signal) light and mounting screws for light. Existing headlight ...

This chrome plastic bezel fits over any 2 inch by 6 inch trailer style rectangular LED light. This is the first time we've had a bezel with a visor...

This mounting base fits all incandescent or LED 1" x 2.5" rectangular marker lights. No wiring or mounting hardware included.

This mounting rim is compatible with any incandescent or LED 1" x 4" rectangular marker light. Includes chrome plastic rim and foam gasket. Light a...

Fits 1" x 2.5" rectangular marker lights. This is a snap-on trim piece, only. It is not a mounting base for this style light.

New combination watermelon light inspired by an "Old School" glass lens appearance and combined with modern LED brightness. The flush mount base al...

These are clear lens, four wire lights. Includes thin foam rubber gasket and stainless steel ring, with stainless steel hardware.

These are three wire lights - the primary color will function as only a marker light. The secondary color will only function as an auxiliary light....

These easy-to-install lights create a beautiful glow inside your air cleaner cans. Simply stick them inside the top of the can, hook them up to pow...

Flush mount. Includes stainless steel mounting ring and hardware. These lights are all dual function with a low side and high side, plus there is a...

Hardwired with three .180 male bullet plugs, attached to about 6" of wire. Wires are white (ground) black (hot) and red (turn signal/high side). Th...

This light has a standard three-prong offset female plug built into the back - this powers the normal stop/turn/tail red functions. There is an add...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

1/2" wide by 17" long. Mounts using supplied 3M double-stick tape. Powered by three .180 male bullet plugs - one ground, one hot to power the amber...

This light features three bullet plugs - one ground, one hot to power the amber side, and a second hot plug to power the blue side. Both colors are...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

This light features a built-in two prong female plug in the back, which powers the amber diodes. There is an additional single male bullet plug, wh...

Measures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...

Using the standard female three-prong offset plug, the incredible Dual Revolution oval LED will light up amber, both as a marker/clearance light, a...

This light features three male bullet plugs - one ground, one hot to power the amber side, and a second hot to power the green side. Both colors ar...

Industry-leading Dual Revolution Technology delivers 1-diode operation and D.O.T. compliant auxiliary function in one, clear polycarbonate lens. Re...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

Please note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...

Dual revolution technology. 19 Diodes and D.O.T compliant to auxiliary function ALL IN ONE - Clear Lens. Polycarbonate Lens resistant to cracks and...

This light is a park/turn/clearance and an auxiliary light, all in one housing! Using the standard three-prong offset plug, it will light up AMBER ...

This light features three male bullet plugs - one ground, one hot to power the amber side, and a second hot to power the purple side. Both colors a...

Measures 3-1/2" diameter across the light face, at the widest point. Overall length is 16-1/4", with 7-15/16" between mounting holes (measured cent...

Please note: On all Dual Revolution Green and Purple lights, some color variation may occur as there is no DOT standard for these colors. All color...

Measures 4" wide across the light face, at the widest point. Overall length is 10-3/4", with 9-1/4" between mounting holes (measured center-to-cent...

Using the standard female three-prong offset plug, the incredible Dual Revolution oval LED will light up amber, both as a marker/clearance light, a...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the amber side, plus an additional male bullet plug ...

Upgrade your vehicle with the Dual Revolution Amber/Red/Blue 1.8" MINI rectangular pedestal LED light. Enjoy the convenience of a marker, turn sign...