Products

1-11/16" from end to end x 7/16" tall. This type of bulb is commonly found in the dome lights of all sorts of trucks, including Peterbilt, Kenworth...

1-11/16" from end to end x 7/16" tall. This type of bulb is commonly found in the dome lights of all sorts of trucks, including Peterbilt, Kenworth...

Sold in PAIRS. These are 3156 single-function LED bulbs.

Sold in PAIRS. These are 3157 dual-function LED bulbs.

Sold SINGLE. These are 3157 dual-function LED bulbs.

These teeny tiny dash bulbs are the smallest we have. They're even smaller than a 194! Approximately 1/8" diameter. They're commonly found in small...

Each light functions and both a marker / clearance light and turn signal or auxiliary light. Mounts in a 3/4" diameter hole.

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This LED light bar includes a short chrome mounting pedestal. These long, thin lights are perfect for steps, wind fins, or any other skinny spot be...

This long, thin strip light is perfect for interior or exterior use. It's lightweight and small enough to be mounted with double-stick tape inside ...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not inclu...

Features: 17"(L) x 1-3/8"(W) x 1"(H). 16-1/8" between the two mounting holes. This light is a flush mount style light. Mounting hardware not incl...

These push-in style bulbs are commonly found in dash gauges, bumper guides, and other areas of the truck. The 360-degree viewing angle makes this b...

9 diodes. Crush proof, 4 different functions. Battery powered - requires 3 AAA batteries (not included).

This small, 3 diode light is perfect for adding a subtle glow to your truck. Great for interior or exterior applications. Functions as a marker, on...

This bullseye/bullet rubber grommet is perfect for replacing only that single rubber piece instead of the entire light. It is 3/4" and fits most bu...

Three 5-watt high power LEDs with faceted wide-angle lens. Fully sealed to keep out water. 12 volt.This light measures 4" wide. This light is AMBER...

This light features 8 different internal flash patterns - including steady. No external flasher mechanism is needed! Change patterns simply by touc...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

Measures 1" diameter. Requires an approximately 3/4" diameter hole for mounting. Single function light, threaded back, wired with two male .180 bul...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

This light features three bullet plugs - one ground, one marker wire, and one turn signal wire. Requires a 3/4" hole to install. Includes chrome be...

Mounts in a 3/4" diameter hole. This light has a threaded back and includes a plastic nut for installation. It is a single-function light, hardwire...

This light's overall measurements are approximately 1" by 1-1/4", including the chrome bezel. This is a dual function (marker and turn signal) ligh...

This light can be mounted as a flush mount, using the rim shown as a related item, or as a grommet mount, using the grommet also shown as a related...

This slender clearance light is curved and ribbed on top, making the 7 diodes inside look like one long, solid line of light. The small shape lends...

This watermelon lens style light has a 3" diameter across the face, a 1-1/8" mounting arm, and an overall height of 4-5/8". Single-function. Hardwi...

This watermelon lens style light has a 3" diameter across the face, a 2-1/8" mounting arm, and an overall height of 5-3/4". Single-function. Hardwi...

Our favorite Peterbilt-style LED is now available from two manufacturers. This one is from United Pacific. The 2 rows of 6 diodes are the same clas...

This flush mount style light is one of our all-time classic favorites. It never goes out of style, and it's really easy to match.Features: Include...

This strobe light bar has 6 different flash styles, and a synchronization wire for hooking up several of the same light in sequence.This is NOT a f...

This great replacement light takes all the irritating maintenance out of your cab lights. Instead of fighting with burned-out bulbs and melted or b...

Fully sealed, fits existing Trucklite cab light housing.This light is hard-wired with two male-end plugs (one positive, one negative), connected to...

This light is hard-wired with two plain wires.

Features a watermelon-style lens (not replaceable). This single-function light is hardwired with two plain wires.Measures 3-7/8" deep (front to bac...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

A simple pedestal light like this one is perfect for mirrors, bumpers, and endless applications on your motorcycle or hot rod. They're durable but ...

These lights are great for mounting to mirror arms, on the ends of your bumper, or anywhere else with space for the simple, single mounting bolt.Th...

Length 14.00", Height 8.25", Depth 1.75" Mounting: Magnetic and Surface Mounting Kits Included Connector: Cigarette Adapter with 15 Foot Cable

***This light is much smaller than standard cab lights!***Measures 8" long x 2.5" wide, with 6.5" between mounting holes. This is a single function...

***This light is much smaller than standard cab lights!***Measures 8" long x 2.5" wide, with 6.5" between mounting holes. This is a single function...

So you want to switch your cab lights over to LED, but you're not interested in a "plain jane" look. These reflectorized lights are the way of the ...

So you want to switch your cab lights over to LED, but you're not interested in a "plain jane" look. These reflectorized lights are the way of the ...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a flush mount base, allowin...

Requires a cab light housing or special bracket for installation. Will not flush mount on its own. This is a dual-function (marker and turn signal)...