Best Sellers

This fully-sealed, single bulb, single function incandescent marker light is commonly used as a license plate's tag light, but it may also be found...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

This flashing strobe unit has 4 user-selectable patterns, which can be changed using the yellow wire. Mounts easily to our beacon brackets or mirro...

This strobe light bar has 6 different flash styles, and a synchronization wire for hooking up several of the same light in sequence.This is NOT a f...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

The classic 2" x 6" trailer marker light is one of those ubiquitous staples of the chrome shop. But that doesn't mean you have to use the same old ...

Features: This light is hard-wired with two plain wires. Chrome bezel hides mounting screws. This light is a flush mount style light. Mounting har...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

This mini-oval is a flush mount light, perfect for the same type of hole that accommodates an M3 or small millennium light. The three rows of diode...

Sold SINGLE. This is a single function light, hardwired with two wires. The included 1157 LED bulb can be replaced.

Sometimes, you can get away with just replacing bulbs. But, when it's time to move up to a whole new housing, don't sell your soul to the dealershi...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

76290, 76291, 76292, 76293, 76294, 76295, 76296, 76297This LED light bar includes a short chrome mounting pedestal. These long, thin lights are per...

This light puts a fun twist on the traditional Peterbilt-style marker light. While most lights in this footprint have two long rows of diodes, this...

While most lights only have diodes pointing straight out, these have a unique feature that most millennium-style lights cannot boast - diodes that ...

The red turn signal is a dual-function light. There are four wires, all attached to a .180 male bullet plug. The ground wire operates both the red ...

Functions as a stop/turn/tail light, with 3 plain wire leads coming out of the back of the light. The decorative chrome bezel snaps on and hides th...

This is a single-function LED light - works as a marker only. Includes stainless steel bezel. Mounting hardware not included.

These lights are single function, only. They are a match for our Dual Revolution series (shown as related items), but they only light up AMBER.

Dual function with three plain wires - will work as both a marker and turn signal. Includes chrome plastic bezel. Measures 6"(L) x 2"(W) x 1-1/8"(H...

Measures 3-1/2" (L) x 1-1/4" (W) x 5/8" (H). Dual-function light - works as both a marker and a turn signal. Features two plain wires with .180 mal...

If you're looking for maximum brightness and visibility for your trailer lights, these are a perfect fit. With a wide-angle, 180-degree viewing are...

This small marker light is perfect for any interior or exterior application. It's slender, but tall, increasing visibility but without sacrificing ...

Each package includes one gasket. Fits on most Grakon 1000 torpedo-style cab / watermelon lights.Bezel and hardware not included.

This light is hard-wired with two male-end plugs (one positive, one negative), connected to the back of the light by a few inches of wire.

Each package includes one 3-3/8" diameter o-ring. Fits on most Grakon 1000 torpedo-style cab lights and watermelon lights.

It's extremely unusual to find a light this small that has been designed to withstand outdoor weather conditions. Those two attributes have made ou...

It's extremely unusual to find a light this small that has been designed to withstand outdoor weather conditions. Those two attributes have made ou...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

These lights, which are specifically designed to fit on the top rail of your trailer, feature a wide-angle diode pattern for maximum visibility.Fea...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

Features: This light is a flush mount style light. Single function. Mounting hardware not included. This light is hard-wired with one eyelet an...

This incandescent light is intended for interior use, only. Features a built-in chrome base and simple on/off switch. Measures approximately 5" dia...

These LED replacement lights for the Grakon 1000 torpedo-style cab light housing found on many trucks, including most Peterbilts, are one of our mo...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This slender clearance light is curved and ribbed on top, making the 7 diodes inside look like one long, solid line of light. The small shape lends...

The Phantom I series is a neat little light - powered by a double bubble/tiger eye style base, but covered with a Millennium-style chrome bezel to ...

These lights are wired with the standard two male bullet style plugs, ground and hot, to light the red side, plus an additional male bullet plug th...

Bolt mount. Also available in a similar magnet mount style. Manufactured in the USA. Measures 5.5" diameter, 4.5" tall.

The timeless Panelite M1 has now been updated, with a new look that will delight drivers for years to come! The smooth Halo Glow utilizes LED diode...

This updated, much-improved light replaces Trux's "Stealth" series. Dimensions: 6-5/8" (L) x 2-1/4" (W) x 5/8" (T). 4-7/16" to 5" between adjustabl...

This low-profile LED marker light has a reflectorized background. The many facets create the illusion of thousands of tiny diodes. It's an attracti...

These are genuine Panelite lights! We purchased these from their existing stock at the time of their liquidation. These are the same lights you've ...

It's extremely unusual to find a light this small that has been designed to withstand outdoor weather conditions. Those two attributes have made ou...