Products

This is a single-function LED light - works as a marker only. Includes stainless steel bezel. Mounting hardware not included.

You might be surprised by how much power is packed into this small package. There are lights twice this size that don't have 16 diodes, but our tig...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It does not include a mounting base. It...

This is a dual-function light. It is hardwired with three wires, connected to .180 male bullet-style plugs. It includes a stainless steel bezel, al...

Includes dual function (marker and turn signal) LED light and stainless steel mounting bezel. Sold SINGLE. Light measures approximately 3-5/16" dia...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

Includes dual function (marker and turn signal) LED light and stainless steel bezel. Sold SINGLE. Light measures approximately 3-5/16" diameter acr...

These slender, flush mount lights are a great addition to any truck or even smaller vehicles. Their small size means they'll fit just about anywher...

Measures 17" (L) x 1" x 1". This is a dual function light - will work as both a marker and a turn signal. Hardwired with three plain wires.

The red turn signal is a dual-function light. There are three wires, all attached to .180 male bullet plugs.  Includes mounting ring. Sold SINGLE.

The classic 2" x 6" trailer marker light is one of those ubiquitous staples of the chrome shop. But that doesn't mean you have to use the same old ...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

This is a single-function light, hardwired with two plain wires. Includes a chrome bezel, which hides the mounting holes. Mounting hardware not inc...

Features: This light is a flush mount style light. Mounting hardware not included. This light is hard-wired with two male-end plugs (one positive,...

Features: This light is a flush mount style light. Mounting hardware not included. This light is hard-wired with two male-end plugs (one positive,...

Flush mount style light. Mounting hardware not included. Hard-wired with two male-end plugs (one positive, one negative), connected to the back of...

5-7/8" x 2". Measures 4-3/4" between mounting holes.This light is a flush mount style light. Mounting hardware not included.This light is hard-wire...

Unlike most trailer lights of this size, this one functions as both a marker and a turn signal. The dual function makes it unique and very useful. ...

This low-profile LED marker light has a reflectorized background. The many facets create the illusion of thousands of tiny diodes. It's an attracti...

This wonderfully bright light features 5 different strobe modes, plus a steady (marker) option. Measures 4-13/16" (L) x 15/16" (W) x 1-9/16" (H). T...

We are big fans of this chunky, sturdy strobe. It's nice and heavy, and features a chrome base. This wonderfully bright light features 5 different ...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

This is a dual function light - it is hard-wired with three plain wires (ground, hot, and turn signal) and can be used as a marker or a turn signal...

If you're looking for maximum brightness and visibility for your trailer lights, these are a perfect fit. With a wide-angle, 180-degree viewing are...

If you're looking for maximum brightness and visibility for your trailer lights, these are a perfect fit. With a wide-angle, 180-degree viewing are...

Includes lens, light housing, incandescent bulb, and stainless steel bezel. This light is a simple replacement that will work temporarily if you're...

Measurements: 3-5/16"(L) x 1-11/16"(W) x 11/16"(H) with 2.5" between mounting screw holes. Chrome bezel hides mounting screws. This light is a flus...

This light is a fresh take on the timeless 12 diode Peterbilt-style marker light. It has a reflectorized backing, which adds just the perfect amoun...

This light is a flush mount style light with a stainless steel bezel. Mounting hardware not included.This light is hard-wired with two male-end plu...

This dual-function light is a popular choice for all kinds of vehicles - trucks, motor homes, even trailers. It requires the use of a mounting rim,...

Note: This light is not a flush mount light. It has a mounting tab on each end, and is intended to be installed in one of the brackets or housings ...

This light is RED when on.These lights function at 12 volts.Converting all your incandescent lights to LED? You may want to read about LED flashers...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

Although it is possible to mount this light without one, the easiest way to install them on your truck is by using one of the accessory housings sh...

This small marker light is perfect for any interior or exterior application. It's slender, but tall, increasing visibility but without sacrificing ...

This is a simple marker light, powerful enough to be seen, but small enough to fit into tight spaces.Features: Measures 3-3/4" (L) x 9/16" (W) x 1...

Each package includes one 3-3/8" diameter o-ring. Fits on most Grakon 1000 torpedo-style cab lights and watermelon lights.

This light bar is durable enough to withstand all kinds of exterior applications - we've seen it mounted on bumpers, down windfins, and hidden behi...

This light bar is durable enough to withstand all kinds of exterior applications - we've seen it mounted on bumpers, down windfins, and hidden behi...

This light is very popular! It's a great option for drivers looking to put light under their truck, or along a narrow area.This light is hardwired ...

Looking for an extra-bright light bar that's perfect for any truck? This one is a big-time favorite in our store. We've seen customers use these ju...

Dual function with three plain wires - will work as both a marker and turn signal. Includes chrome plastic bezel. Measures 6"(L) x 2"(W) x 1-1/8"(H...

Measures 6" L x 2" W x 1-5/8" H. This light is a flush mount style light. Mounting hardware not included. These lights function at 12 volts.

This is an exceptionally low-profile marker light. While most lights of this style are nearly an inch tall, this one measures in at 1/4" - almost i...

Electrical Built-in 2 prong female plug 12 volt Single function Design 12 Amber diodes - 2 rows of 6 6-1/4" (H) x 2-1/4" (W) x 1/4" (D) Includes...

While most lights only have diodes pointing straight out, these have a unique feature that most millennium-style lights cannot boast - diodes that ...

While most lights only have diodes pointing straight out, these have a unique feature that most millennium-style lights cannot boast - diodes that ...